MBPRO2 won't start

This section covers the Meteobridge PRO, PRO2, NANO SD, Raspberry Pi and VM platforms exclusively

Moderator: Mattk

Post Reply
BeBe
Senior Boarder
Senior Boarder
Posts: 51
Joined: Fri Feb 12, 2016 6:36 pm
Contact:
Contact BeBe

MBPRO2 won't start

Post by BeBe »

Hello, my Meteobridge PRO2 spontaneously restarted after a few minutes following a reboot and then froze, while the green LED light is on but nothing else happens. I unplugged it from the power and restarted it a few times, but it froze every time while the green LED light is on.
Top
Mattk
Platinum Boarder
Platinum Boarder
Posts: 1476
Joined: Mon Sep 22, 2014 3:24 am

Re: MBPRO2 won't start

Post by Mattk »

Green LED should always be on and indicates power. Loss of connectivity would be indicated by a fast flashing Yellow LED and normal operation the green LED will be solid and red (intermittent blinking) LED indicating RF data reception. Only green could indicate there may be no internet connection which would be the first thing to confirm?

Has there been any recent changes to your network/router etc? How is the unit connected, Ethernet or WiFi?
Top
Post Reply

Return to “Meteobridge PRO/PRO2/NANOSD/RPI/VM Discussion”