The WeatherHub doesn't appear to be receiving data
Moderator: Mattk
The WeatherHub doesn't appear to be receiving data
We have a WMR-200, and our sensor page does not appear to have any sensor data. The log files keep showing division by zero errors. If I didn't know any better, I'd think the 200 isn't connected to the WeatherHub, but they are physically connected. We're getting wrongchecksum errors, but elsewhere within this blog we've seen that this isn't a huge issue. Also, on the system information page, the WAN IP entry states "no internet access" in red, even though it is physically on our network. We're using an HP computer within Windows Vista. Any help would be appreciated.
Re: The WeatherHub doesn't appear to be receiving data
Boris e-mailed about the internet issue...the DNS server IP had to be set to 8.8.8.8 as our gateway router didn't work as expected.
-
LorieJCall
- Fresh Boarder
- Posts: 8
- Joined: Sun Feb 27, 2011 4:09 pm
- Location: Minneapolis, MN
- Contact:
Re: The WeatherHub doesn't appear to be receiving data
@Cdmr9816: You might also want to take a look at Google Namebench, http://code.google.com/p/namebench/, which will test the public DNS servers from your computer and rank them as either "fastest for your type of browsing" or "geographically closest to you". Depending on how your LAN is set up, you can plug this information into your MeteoHub or your router. Namebench is service-agnostic: when I used the tool, Google Public DNS was in the middle of the performance ratings.cdmr9816 wrote:Boris e-mailed about the internet issue...the DNS server IP had to be set to 8.8.8.8 as our gateway router didn't work as expected.