woolfg wrote: ↑Fri Dec 22, 2023 10:55 pm
woolfg wrote: ↑Fri Dec 22, 2023 5:48 pm
Hi Brian
Thanks for the update
I have a voc sensor in my Purple Air AQ sensor and I wondered if it is possible to display this value ( I think you call it the CO2 value ). It shows N/A at the moment but I recall this value used to be shown
If its easier perhaps you would point me at the files I would need to change and Ill have a go myself
Warm wishes
Graham
Hi Brian
I have tried this and it doesnt work - I cant see any voc data in the purpleairtxt in the jsondata folder
http://www.woolfg.hyperphp.com/Ringwood
Dont worry about it Brian is was just a nice to have
Warm wishes
Graham
good morning Graham
i cant be of much help but here is a comparison and your current purple air does it does not reflect CO2(VOC) data in the outputs , is the VOC actually working because it looks as if it not ??
cant help much on this looks potentially are hardware issue..
also see gary 'whaleybridge' his is working fine as seen in the last output below
so this one below show VOC in the output (purpleair.txt) is actually your data from I probably used as a setup earlier this year converting the timestamp Saturday, 25 February 2023 06:17:23 *
BME680 sensor is registered !
Code: Select all
[b] "sensor_index" : 48485,
"last_modified" : 1583233822,
"date_created" : 1581961223,
"last_seen" : 1677305760,
"private" : 0,
"is_owner" : 0,
[b][b] "name" : "Ringwood",[/b][/b]
"icon" : 0,
"location_type" : 0,
"model" : "PA-II",
[b]"hardware" : "2.0+BME680+PMSX003-B+PMSX003-A",[/b]
"led_brightness" : 35,
"firmware_version" : "7.02",
"rssi" : -59,
"uptime" : 21744,
"pa_latency" : 272,
"memory" : 15512,
"position_rating" : 5,
"latitude" : 50.8542,
"longitude" : -1.7667,
"altitude" : 101,
"channel_state" : 3,
"channel_flags" : 0,
"channel_flags_manual" : 0,
"channel_flags_auto" : 0,
"confidence" : 100,
"confidence_auto" : 100,
"confidence_manual" : 100,
"humidity" : 71,
"humidity_a" : 71,
"humidity_b" : 71,
"temperature" : 42,
"temperature_a" : 42,
"temperature_b" : 42,
"pressure" : 1013.67,
"pressure_a" : 1013.67,
"pressure_b" : 1013.67,
[b]"voc" : 52.6,
"voc_b" : 52.56,[/b]
"analog_input" : 0.01,
"pm1.0" : 3.0,
"pm1.0_a" : 3.0,
"pm1.0_b" : 3.0,
"pm2.5" : 54.6,
"pm2.5_a" : 5.0,
"pm2.5_b" : 4.2,
"pm2.5_alt" : 3.0,
"pm2.5_alt_a" : 3.1,
"pm2.5_alt_b" : 2.8,
"pm10.0" : 5.6,
"pm10.0_a" : 6.7,
"pm10.0_b" : 4.5,
this is your current purple air output below from this morning converting the timestamp Saturday, 23 December 2023 05:36:06
*
there is no BME680 sensor registered !!!!
Code: Select all
[b]
"sensor_index" : 48485,
"last_modified" : 1583233822,
"date_created" : 1581961223,
"last_seen" : 1703309766,
"private" : 0,
"is_owner" : 0,
[b] "name" : "Ringwood",[/b]
"icon" : 0,
"location_type" : 0,
"model" : "PA-II",
[b]"hardware" : "2.0+PMSX003-B+PMSX003-A",[/b]
"led_brightness" : 35,
"firmware_version" : "7.04",
"rssi" : -61,
"uptime" : 25439,
"pa_latency" : 383,
"memory" : 6624,
"position_rating" : 5,
"latitude" : 50.8542,
"longitude" : -1.7667,
"altitude" : 101,
"channel_state" : 3,
"channel_flags" : 0,
"channel_flags_manual" : 0,
"channel_flags_auto" : 0,
"confidence" : 100,
"confidence_auto" : 100,
"confidence_manual" : 100,
"analog_input" : 0.01,
"pm1.0" : 0.3,
"pm1.0_a" : 0.3,
"pm1.0_b" : 0.2,
"pm2.5" : 1.0,
"pm2.5_a" : 1.0,
"pm2.5_b" : 1.0,
"pm2.5_alt" : 1.0,
"pm2.5_alt_a" : 0.9,
"pm2.5_alt_b" : 1.1,
"pm10.0" : 1.7,
"pm10.0_a" : 1.6,
"pm10.0_b" : 1.8,
here is gary 'whaleybridge ' timestamp Saturday, 23 December 2023 06:17:17
https://whaleybridge-weather.com/weathe ... layout.php
*
note BME680 is registered !
Code: Select all
{
"sensor_index" : 57451,
"last_modified" : 1594145384,
"date_created" : 1591736982,
"last_seen" : 1703312188,
"private" : 0,
"is_owner" : 0,
"name" : "Whaley Bridge",
"icon" : 0,
"location_type" : 0,
"model" : "PA-II",
[b]"hardware" : "2.0+BME280+BME68X+PMSX003-B+PMSX003-A",[/b]
"led_brightness" : 35,
"firmware_version" : "7.04",
"rssi" : -59,
"uptime" : 163,
"pa_latency" : 243,
"memory" : 4552,
"position_rating" : 5,
"latitude" : 53.33302,
"longitude" : -1.991432,
"altitude" : 689,
"channel_state" : 3,
"channel_flags" : 0,
"channel_flags_manual" : 0,
"channel_flags_auto" : 0,
"confidence" : 86,
"confidence_auto" : 86,
"confidence_manual" : 86,
"humidity" : 64,
"humidity_a" : 59,
"humidity_b" : 69,
"temperature" : 56,
"temperature_a" : 57,
"temperature_b" : 56,
"pressure" : 985.76,
"pressure_a" : 985.58,
"pressure_b" : 985.94,
[b]"voc" : 82.3,
"voc_b" : 82.32,[/b]
screenshot of Gary with purple air module showing CO2 (VOC)
- g.png (224.05 KiB) Viewed 167869 times
