New uses, Davis 6163 + Weatherlink USB + Meteohub
Posted: Fri May 01, 2015 6:22 am
Hi... just unpacking my new Davis Vantage Pro 2 (6163) unit and trying to get it to work with Meteohub.
The console is working fine, showing all sensors.
The usb adapter is showing up on the Meteohub as /dev/ttyUSB0 and /dev/ttyMH131 in the Weather Station section.
The Meteohub "First Steps" document implies the sensor data should be coming in, but I'm not showing anything. I've tried both /dev devices via the pull-down, no change. If I unplug the console, both devices disappear from the menu, as expected.
I'm presuming I'm doing something very basic wrong. Can someone shed some light?
The console is working fine, showing all sensors.
The usb adapter is showing up on the Meteohub as /dev/ttyUSB0 and /dev/ttyMH131 in the Weather Station section.
The Meteohub "First Steps" document implies the sensor data should be coming in, but I'm not showing anything. I've tried both /dev devices via the pull-down, no change. If I unplug the console, both devices disappear from the menu, as expected.
I'm presuming I'm doing something very basic wrong. Can someone shed some light?
