Meteobridge Won't Upload Live Data: Help, Please
Posted: Sat Jul 04, 2015 5:34 pm
My Meteobridge TL-MR3020 worked perfectly with my Davis Vantage Pro2 via USB (with a USB hub) via my wireless LAN for over a year. However, I recently changed wireless routers and since that time I have been unable to upload live data via Meteobridge. Meteobridge software version is Meteobridge 2.5 (Jul 3 2015, build 6646), FW 1.1. The problem began when I reconnected the MR3020 to my new wireless LAN.
The Vantage Pro2 is on AC power and the batteries are fresh. I have reset the Vp2 and rebooted the MR-3020 many times. Other than replacing my wireless router there have been no hardware changes - same VP2, same MR-3020. Historical data uploads daily without any problem. There is no live data.
Excerpts from my message log:
logger (04.07.2015 11:20:29): gettime request sent.
logger (04.07.2015 11:20:30): Historical data loaded (15 records).
logger (04.07.2015 11:20:30): data logger (version 5.0i, build 6646) started.
logger (04.07.2015 11:20:31): connect station 0 (Vantage via USB serial).
logger (04.07.2015 11:20:31): wakeup sent.
logger (04.07.2015 11:20:31): internal logger activated.
logger (04.07.2015 11:20:31): syncing.
logger (04.07.2015 11:20:41): gettime request sent.
logger (04.07.2015 11:20:51): gettime request sent.
logger (04.07.2015 11:20:51): communication blocked because incompatible Davis data logger or console/envoy on weak batteries.
logger (04.07.2015 11:21:01): gettime request sent.
logger (04.07.2015 11:21:11): disconnect station 0 (Vantage): timeout
logger (04.07.2015 11:21:41): connect station 0 (Vantage via USB serial).
logger (04.07.2015 11:21:41): wakeup sent.
logger (04.07.2015 11:21:41): internal logger activated.
logger (04.07.2015 11:21:41): syncing.
logger (04.07.2015 11:21:51): gettime request sent.
logger (04.07.2015 11:22:01): gettime request sent.
logger (04.07.2015 11:22:01): communication blocked because incompatible Davis data logger or console/envoy on weak batteries.
Screenshots of set up network tab, system tab data and live tab:
Any help would be appreciated! Thanks!
The Vantage Pro2 is on AC power and the batteries are fresh. I have reset the Vp2 and rebooted the MR-3020 many times. Other than replacing my wireless router there have been no hardware changes - same VP2, same MR-3020. Historical data uploads daily without any problem. There is no live data.
Excerpts from my message log:
logger (04.07.2015 11:20:29): gettime request sent.
logger (04.07.2015 11:20:30): Historical data loaded (15 records).
logger (04.07.2015 11:20:30): data logger (version 5.0i, build 6646) started.
logger (04.07.2015 11:20:31): connect station 0 (Vantage via USB serial).
logger (04.07.2015 11:20:31): wakeup sent.
logger (04.07.2015 11:20:31): internal logger activated.
logger (04.07.2015 11:20:31): syncing.
logger (04.07.2015 11:20:41): gettime request sent.
logger (04.07.2015 11:20:51): gettime request sent.
logger (04.07.2015 11:20:51): communication blocked because incompatible Davis data logger or console/envoy on weak batteries.
logger (04.07.2015 11:21:01): gettime request sent.
logger (04.07.2015 11:21:11): disconnect station 0 (Vantage): timeout
logger (04.07.2015 11:21:41): connect station 0 (Vantage via USB serial).
logger (04.07.2015 11:21:41): wakeup sent.
logger (04.07.2015 11:21:41): internal logger activated.
logger (04.07.2015 11:21:41): syncing.
logger (04.07.2015 11:21:51): gettime request sent.
logger (04.07.2015 11:22:01): gettime request sent.
logger (04.07.2015 11:22:01): communication blocked because incompatible Davis data logger or console/envoy on weak batteries.
Screenshots of set up network tab, system tab data and live tab:
- 2015-07-04_11-59-09.gif (29.6 KiB) Viewed 1783 times
- 2015-07-04_11-59-09.gif (29.6 KiB) Viewed 1783 times
- 2015-07-04_11-59-09.gif (29.6 KiB) Viewed 1783 times
Any help would be appreciated! Thanks!