meteohub.de

Hi.
I have a Davis weather station united a one Belfryboy Clone USB logger and a one Meteohub .

Everything works fine but has three days that has not Data on SENSORS Card

and log Card writes :

I did RESTART , start - stop Data Logging Process but nothing .
connecting one Meteobridge on the door of 22222 to Meteohub and work fine the Meteobridge

Can you help me .

My case is a little bit different. Meteohub see that there's a station conected but no sensors are shown on sensors page.
My hardware is a Davis Vantage Pro 2 6162 + Belfryboy Clone USB logger + Raspberry Pi 3 Model B.

Settings look ok. I guess the Davis Console has hung-up by a logger inserted during operation.
Power-cycle the console and data should come in fine again.

What I did was connect my Meteohub in another Davis 6152, configure all things and then connect again on the other Davis with Belfryboy Clone USB logger. Now it's working fine.

Sometimes the USB logger hangs when it is plugged in to a powered console.
Therefore, the itself logger might be still fine.