meteohub.de

When I place a USB stick in port 1 to clone from port 2 and then power up, the web server is not accessible. I just get the generic \"Firefox can't establish a connection to the server\" message. IPScan and the beeps indicate a consistent IP address. I'm using software v2.4. If I shutdown, remove the port 1 stick, and insert the WS, everything works normally. Any ideas?

Jeff

When you boot the system just one usb stick is allowed to be plugged in. It does not matter if in Disk 1 or Disk 2 slot.

Do you have the problem even with just one stick plugged during boot?