meteohub.de

Configuration: VP2 connected to Meteobridge on TL-MR3020 via USB. Meteobridge version 3.7 FW 1.2.
Issue: The daily rainfall showing on the VP2 shows 0.03". WU is showing 0.09". The rain multiplier in MB is 1.00.

What amount does the MB show in the live data?

Live data showed .03" and WU showed .09". I noticed while I was watching WU it increased by .01" and the live data didn't show a change.

Is WU getting its data from the Meteobridge or from a connected PC or via Davis WLIP?

A Davis WLIP.

OK, and Meteobridge is reading data from WLIP or directly RF from sensors (via Meteostick or MB PRO)?

I've been waiting for another rain day, even though no rain is indicating on the PWS we have had a drizzle. Today WU shows .11" and VP2 shows .00", Meteobridge live data shows 0.00mm/0.00in. I'm connected to the VP2 from the Meteobridge through a USB hub. The Meteobridge is communicating to my router via WIFI.

Another piece of information: When I log into WU through Safari, the rain total is correct. Just on the WU APP on my iPhone is it in error. Today we have received .25" of rain and WU app shows 0.00"

dennisanderson wrote: Tue Nov 06, 2018 6:50 pm A Davis WLIP.

So you have a WLIP somewhere else (apart from the posted image) which is sending data to WU then?

dennisanderson wrote: Sat Nov 24, 2018 6:39 am Another piece of information: When I log into WU through Safari, the rain total is correct. Just on the WU APP on my iPhone is it in error. Today we have received .25" of rain and WU app shows 0.00"

So WU doesn't show the same data via different systems yet WU data is coming from the same source?

Today both the WU web page and my iPhone WU are the same. The VP2 shows .10" but the Meteobridge shows .31". As you can see, everything else seems to be correct.

Reference previous post. The both the web and the iPhone app show .31". The same as the meteobridge.

Today for two hours, my iPhone indicated .12" of rain. Then went back to .00"

When does WU's daily rain total rollover?