Page 1 of 1
Twitter Templates. **solved**
Posted: Sun Dec 09, 2018 2:46 pm
by ConligWX
Hi.
just thought I'd share my Twitter Template for anyone that wants it. set at "after every full hour"
Code: Select all
Time: [hh]:[mm] • #Conlig, #Bangor • Temp: [th0temp-act:--]°C • Wind: [wind0dir-act=endir:---] [wind0wind-act=mph.1:--] to [wind0wind-max10=mph.1:--]mph • Pressure: [thb0press-act:--]hPa • Rain: [rain0total-sumday]mm • Hum [th0hum-act.0=:--]％ • Solar: [sol0rad-act:--]W/m² • UV Index: [uv0index-act:--] • Sunrise: [mbsystem-sunrise:--] • Sunset: [mbsystem-sunset:--] •
Time: 12:00 • #Conlig, #Bangor • Temp: 7.5°C • Wind: 2.9 to 8.1mph W • Pressure: 1005.2hPa • Rain: 0.0mm • Hum 85％ • Solar: 60.0W/m² • UV Index: 0.0 • Sunrise: 08:33 • Sunset: 15:57 •
Forecast is just the plain Davis one which is posted every 6 Hours:
Code: Select all
#Conlig, #Bangor, Forecast at Time: [hh]:[mm] • [forecast-text]
#Conlig, #Bangor, Forecast at Time: 12:00 • Partly cloudy and cooler.
hope this helps someone.
Please share your own Template Message for Twitter too!
Re: Twitter Templates.
Posted: Mon Dec 10, 2018 5:22 am
by WA4OPQ
Here's my 7PM summary:
Code: Select all
[MMM] [DD] - High and lows for Centerville, just west of the town square, are #if# {*105 - [th0temp-dmax=F.1:0] *} #then# [th0temp-dmax=F.1:--]º #else# [th0temp-dmax.1:--]º #fi#and [th0temp-dmin=F.1:--]º F. #if# {*([rain0total-daysum=in.2:0] > .02)*} #then#Today's rainfall: [rain0total-daysum=in.2:0] inches #else# https://t.co/9EXJdgeXZS#fi#
Dec 06 - High and lows for Centerville, just west of the town square, are 46.4º and 23.2º F.
https://www.wunderground.com/personal-w ... =KTNCENTE3
or
Dec 09 - High and lows for Centerville, just west of the town square, are 34.9º and 32.9º F. Today's rainfall: 0.20 inches
Re: Twitter Templates.
Posted: Tue Jan 01, 2019 4:02 pm
by ConligWX
Just updated my to include Cloudbase height and ET too:
Code: Select all
Time: [hh]:[mm] • Temp: [th0temp-act:--]°C • Wind: [wind0dir-act=endir:---] [wind0wind-act=mph.1:--] to [wind0wind-max10=mph.1:--]mph • Pressure: [thb0press-act:--]hPa • Rain: [rain0total-sumday]mm • Hum: [th0hum-act.0=:--]％ • ET: [sol0evo-act.1=:--]mm • Solar: [sol0rad-act:--]W/m² • UV Index: [uv0index-act:--] • Sunrise: [mbsystem-sunrise:--] • Sunset: [mbsystem-sunset:--] • Cloudbase: #if#[th0temp-act.1:0.0]>[th0dew-act.1:0.0]#then#{*([th0temp-act.1:0.0]-[th0dew-act.1:0.0])*400*0}#else#0#fi#ft • #Conlig, #Bangor •
View now looks like this:
- cloudbase.jpg (28.57 KiB) Viewed 4478 times
Re: Twitter Templates.
Posted: Mon Feb 18, 2019 3:50 am
by kds
After some inspiration by ConligWX, here's my template:
Code: Select all
It's currently [th0temp-act=F.1:--]° outside#if# {*([wind0chill-act=F.1:--] < [th0temp-act=F.1:--])*} #then# with a wind chill of [wind0chill-act=F.1:--]°#else##fi##if#{*([th0heatindex-act=F.1:--] > [th0temp-act=F.1:--])*} #then# with a heat index of [th0heatindex-act=F.1:--]°#else##fi#. #if#{*([wind0wind-hmax=mph.1:--] > 0)*}#then#Wind is [wind0wind-havg=mph.1]mph from from the [wind0dir-havg=endir] with gusts up to [wind0wind-hmax=mph.1:--]mph.#else##fi# #if# {*([rain0total-daysum=in.2:0] > .02)*} #then#It has rained [rain0total-hoursum=in.2]in in the past hour, [rain0total-sumday=in.2]in total today. #else# #fi#
Here are the conditions:
- it will always show temp.
- if the wind chill is less than the temp, show wind chill.
- if the heat index is greater than the temp, show heat index.
- if the wind is gusting to greater than 0mph, then show wind speed, gust, and direction.
- if it has rained more than .02" in the day, then show total rainfall and rainfall rate for the past hour (it tweets hourly).
Re: Twitter Templates.
Posted: Mon Feb 18, 2019 2:42 pm
by ConligWX
Thanks for the post.
Re: Twitter Templates.
Posted: Fri Apr 26, 2019 1:38 pm
by ConligWX
Updated mine:
Code: Select all
Time: [hh]:[mm] • Temp: [th0temp-act:--]°C • Wind: [wind0dir-act=endir:---] [wind0wind-act=mph.1:--] to [wind0wind-max10=mph.1:--]mph • Pressure: [thb0press-act:--]hPa • Rain: [rain0total-sumday]mm • Hum: [th0hum-act.0=:--]％ • ET: [sol0evo-act.1=:--]mm • Solar: [sol0rad-act:--]W/m² • UV Index: [uv0index-act:--] • Sunrise: [mbsystem-sunrise:--] • Sunset: [mbsystem-sunset:--] • Cloudbase: #if#[th0temp-act.1:0.0]>[th0dew-act.1:0.0]#then#{*([th0temp-act.1:0.0]-[th0dew-act.1:0.0])*400*0}#else#0#fi#ft • #Conlig, #Bangor • bit.ly/2TzKYFb •
Time: 12:00 • Temp: 13.2°C • Wind: W 2.0 to 6.9mph • Pressure: 992.9hPa • Rain: 0.0mm • Hum: 82％ • ET: 0.3mm • Solar: 142.0W/m² • UV Index: 0.7 • Sunrise: 05:55 • Sunset: 20:46 • Cloudbase: 1200ft • #Conlig, #Bangor •
http://bit.ly/2TzKYFb •
- Capture.JPG (26.44 KiB) Viewed 4272 times
Re: Twitter Templates.
Posted: Thu Feb 27, 2020 5:40 pm
by BigSkyWeather
kds wrote: ↑Mon Feb 18, 2019 3:50 am
After some inspiration by ConligWX, here's my template:
Code: Select all
It's currently [th0temp-act=F.1:--]° outside#if# {*([wind0chill-act=F.1:--] < [th0temp-act=F.1:--])*} #then# with a wind chill of [wind0chill-act=F.1:--]°#else##fi##if#{*([th0heatindex-act=F.1:--] > [th0temp-act=F.1:--])*} #then# with a heat index of [th0heatindex-act=F.1:--]°#else##fi#. #if#{*([wind0wind-hmax=mph.1:--] > 0)*}#then#Wind is [wind0wind-havg=mph.1]mph from from the [wind0dir-havg=endir] with gusts up to [wind0wind-hmax=mph.1:--]mph.#else##fi# #if# {*([rain0total-daysum=in.2:0] > .02)*} #then#It has rained [rain0total-hoursum=in.2]in in the past hour, [rain0total-sumday=in.2]in total today. #else# #fi#
Here are the conditions:
- it will always show temp.
- if the wind chill is less than the temp, show wind chill.
- if the heat index is greater than the temp, show heat index.
- if the wind is gusting to greater than 0mph, then show wind speed, gust, and direction.
- if it has rained more than .02" in the day, then show total rainfall and rainfall rate for the past hour (it tweets hourly).
Thank you for sharing this code. I've implemented it in my hourly tweet reporting but I'm having an issue with the rainfall. This is what is outputs:
Conditions at 12:00 PM - 30.4°F outside with a wind chill of 25.7°F. It has rained [rain0total-hoursum=in.2]in in the past hour, 0.03in total today.
Any ideas what's wrong? I've copied your code verbatim and there's no extra characters/spaces/etc. that might have accidentally made its way in.
Thanks in advance for any help you (or anyone else) can give.
Re: Twitter Templates.
Posted: Fri Mar 13, 2020 7:15 pm
by PSJohn
BigSkyWeather wrote: ↑Thu Feb 27, 2020 5:40 pm
kds wrote: ↑Mon Feb 18, 2019 3:50 am
After some inspiration by ConligWX, here's my template:
Code: Select all
It's currently [th0temp-act=F.1:--]° outside#if# {*([wind0chill-act=F.1:--] < [th0temp-act=F.1:--])*} #then# with a wind chill of [wind0chill-act=F.1:--]°#else##fi##if#{*([th0heatindex-act=F.1:--] > [th0temp-act=F.1:--])*} #then# with a heat index of [th0heatindex-act=F.1:--]°#else##fi#. #if#{*([wind0wind-hmax=mph.1:--] > 0)*}#then#Wind is [wind0wind-havg=mph.1]mph from from the [wind0dir-havg=endir] with gusts up to [wind0wind-hmax=mph.1:--]mph.#else##fi# #if# {*([rain0total-daysum=in.2:0] > .02)*} #then#It has rained [rain0total-hoursum=in.2]in in the past hour, [rain0total-sumday=in.2]in total today. #else# #fi#
Here are the conditions:
- it will always show temp.
- if the wind chill is less than the temp, show wind chill.
- if the heat index is greater than the temp, show heat index.
- if the wind is gusting to greater than 0mph, then show wind speed, gust, and direction.
- if it has rained more than .02" in the day, then show total rainfall and rainfall rate for the past hour (it tweets hourly).
Thank you for sharing this code. I've implemented it in my hourly tweet reporting but I'm having an issue with the rainfall. This is what is outputs:
Conditions at 12:00 PM - 30.4°F outside with a wind chill of 25.7°F. It has rained [rain0total-hoursum=in.2]in in the past hour, 0.03in total today.
Any ideas what's wrong? I've copied your code verbatim and there's no extra characters/spaces/etc. that might have accidentally made its way in.
Thanks in advance for any help you (or anyone else) can give.
I'm receiving the same results when posting hourly. I'm assuming it is because the hourly rain resets at the top of the hour so there is no data yet. I could be wrong on this and waiting response from someone that knows.
Also tried posting at 45 after the hour, it works but then I wonder if the above is true that is it only pulling the data from minute 1 to 45 each hour?
UPDATE: I changed the interval to "before every full hour" and it is now working without any issues!
Re: Twitter Templates.
Posted: Sat Mar 14, 2020 11:47 am
by admin
I think the explanation that when no rain information has yet been recorded for the current hour, then "[rain0total-hoursum=in.2]" might not be evaluated because of no data. when you change to "[rain0total-hoursum=in.2:0]" you should be fine. Sensor data should always be given a default reply in case no data there.