Page 1 of 1
My Meteobridge has no outdoor sensor data. **solved**
Posted: Sat Oct 23, 2021 7:57 pm
by captgadget
showing up. Indoor but no outdoor. Any suggestions. I'm using the Davis Weather Link Live
Re: My Meteobridge has no outdoor sensor data
Posted: Sat Oct 23, 2021 10:09 pm
by wvdkuil
Did you check if the IP-address is valid
Is the correct transmitter selected from the dropdown
It would be helpfull if you posted a screenshot of the Meteobridge tab were you setup the WLL as your primary station.
You should also check
if the WLL is correctly functioning using this command in your browser
http://192.168.0.128/v1/current_conditions
Replace
192.168.0.128 with the IP-address of your WLL.
The data returned should contain texts such as
Code: Select all
"temp": 50.6,"hum":86.2,"dew_point": 46.6,
"wind_speed_last":0.00,"wind_dir_last":0,"wind_speed_avg_last_1_min":0.00,
Succes, Wim
Re: My Meteobridge has no outdoor sensor data
Posted: Sat Oct 23, 2021 10:32 pm
by captgadget
I used your functioning link with my info and everything comes back in good order. What I find strange is that when I select WLL to upload to WU all the info shows but if I check my devices it shows the station offline.
https://www.wunderground.com/dashboard/ ... wx_pwsdash So WLL is sending to WU but I'm guessing since my station is offline that's why it doesn't work in the Meteobridge. Appreciate your insight.
"temp": 88.9,"hum":61.5,"dew_point": 74.0,"wet_bulb": 76.9,"heat_index": 98.1,
- Screen Shot 2021-10-23 at 3.23.02 PM.png (147.88 KiB) Viewed 1743 times
Re: My Meteobridge has no outdoor sensor data
Posted: Sat Oct 23, 2021 10:51 pm
by captgadget
- Screen Shot 2021-10-23 at 7.30.08 AM.png (293.4 KiB) Viewed 1743 times
Here's what I'm referring to when I say there is outdoor sensor just indoors
Re: My Meteobridge has no outdoor sensor data
Posted: Sun Oct 24, 2021 8:26 am
by wvdkuil
captgadget wrote: Sat Oct 23, 2021 10:32 pm
I used your functioning link with my info and everything comes back in good order. What I find strange is that when I select WLL to upload to WU all the info shows but if I check my devices it shows the station offline.
https://www.wunderground.com/dashboard/ ... wx_pwsdash So WLL is sending to WU but I'm guessing since my station is offline that's why it doesn't work in the Meteobridge. Appreciate your insight.
"temp": 88.9,"hum":61.5,"dew_point": 74.0,"wet_bulb": 76.9,"heat_index": 98.1,
Screen Shot 2021-10-23 at 3.23.02 PM.png
In that screenshot you did not specify which sensor sets you have.
Now only WLL integrated sensors are processed, that are
inside temp/hum/pressure a.s.o.
Normally, transmitter nr 1 is the ISS (outside sensensuite). That ISS has all normal outside sensors temp, hum, wind a.s.o.
You have to add that in the second part, see attached screenshot.
You have to setup that before the Meteobridge knows were to look,
Wim
Re: My Meteobridge has no outdoor sensor data
Posted: Sun Oct 24, 2021 3:04 pm
by captgadget
Bingo!!!!!! Thank you thank you don't know how to say it in your native language but thanks a million!