meteohub.de

Hi,

I have a Davis vantage pro 2 weather station with receiver display.

I have the following in place:

TL-MR3040 -> Unpowered USB 2.0 hub -> envoy 8x -> ISS.

This was working on v3.9 for a number of years now.

Today I updated the TL-MR3040 to v5.2 firmware. Now I am trying to setup the meteo bridge again.

I have added the envoy 8x in and selected one of the "Device" options. Not sure what the difference is between the two:
I have these settings in place:
When I look at the Mapping section I don't have any options:
So with these settings, I don't see any live data coming from the Envoy 8x or the vantage transmitter:
What am I doing wrong here?

I'm experiencing similar problem, but different hardware.
Meteobridge -> Davis Emulator (by anemos)
Without USB hub.
To resolve I need to connect and then disconnect the Davis Emulaor USB Stick.
Then save again the configuration to restart the logger.

BrentonSpear wrote: Mon Jan 10, 2022 8:13 am Hi,

I have a Davis vantage pro 2 weather station with receiver display.

I have the following in place:

TL-MR3040 -> Unpowered USB 2.0 hub -> envoy 8x -> ISS.

Are you sure you have one of the very few "Envoy 8x"? I think you have a regular Envoy and then you have to select "Vantage" as station type.

Hi,

I changed it to Vantage and it seems to be working now.

My home setup has the envoy 8x and I thought our holiday home setup I was referring to in the post also had the envoy 8x but maybe it doesn’t

Thanks for the response.

Brenton