Page 1 of 1
[thb0seapress-avg.1:---] empty in last 7 days export file **solved**
Posted: Fri Sep 16, 2022 3:30 pm
by LucV
I have a Meteobridge NANO installed in a Vantage PRO2 display.
In a custom export file with a the last 7 days of history, I have an empty value for [thb0seapress-avg.1:---]
This was filled until July 19th 2022. I saw on
https://www.meteobridge.com/wiki/index.php/Forum that there was an update of the firmware that day. So I think this issue could have been related to that update.
I tried to fix this issue by using [thb0seapress-lastval.1:---] and [thb0seapress-act.1:---], but this still results in an empty tag. The tag is however working in exports with actual values.
How can I work around or fix this, or is it a (known) firmware issue? And to whom should I address that issue?
Regards,
Luc
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Fri Sep 16, 2022 3:53 pm
by admin
Are you using these variables in export definitions or in HTTP upload templates?
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Fri Sep 16, 2022 4:50 pm
by LucV
I have an event created to export this file every day. And a second event (that is triggered by the first event) that uploads this file with FTP to a website.
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Sat Sep 17, 2022 8:40 am
by admin
Do you see data for "thb0seapress" on "History - Edit Hour Data" tab for the selected time frame?
Any mappings for this sensor on "Station - Mapping" tab?
Which time resolution are you using for export? hourly?
Any Error messages on "System - Log File" tab?
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Mon Sep 19, 2022 8:22 am
by LucV
No, In history tab I don't see any data for thb0seapress.
The sensor is mapped. See below:
- Schermafbeelding 2022-09-19 om 08.21.33.png (220.77 KiB) Viewed 1182 times
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Mon Sep 19, 2022 9:42 am
by Mattk
Just to confirm this is a standard NANO (as you indicated) and not a NanoSD?
Standard Nano does not have a History tab to edit. On the [Raw Sensor Tab] you should see a pressure value on the Indoor line (metric & Imperial), on the [Min/Max data] tab you should also have a "pressure" and a "sealevel pressure" value for Now, today, Month year , All etc?
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Mon Sep 19, 2022 10:01 am
by LucV
I have a NANO SD version:
- Schermafbeelding 2022-09-19 om 09.49.14.png (153.74 KiB) Viewed 1179 times
On the history tab I see a graph for th0temp, but not for thb0seapress
- Schermafbeelding 2022-09-19 om 09.51.02.png (106.63 KiB) Viewed 1179 times
- Schermafbeelding 2022-09-19 om 09.51.44.png (98.2 KiB) Viewed 1179 times
However in I see pressure in Live Data tab -> Min/Max Data. Here you see now sealevel pressure = 1019.3 mb.
In Today and Month columns the min value is empty. But in Year and All columns this filled. Because this used to work until an update in July, I assume this issue could be related to that release.
- Schermafbeelding 2022-09-19 om 09.55.39.png (438.76 KiB) Viewed 1179 times
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Mon Sep 19, 2022 3:56 pm
by LucV
I found in the logging an error every minute on inserting thb0seapress with a message that the "database disk image is malformed".
So I tried a rebuild of the database on reboot. It took about 3 hours to complete the rebuild and now it seems to work again.
Re: [thb0seapress-avg.1:---] empty in last 7 days export file
Posted: Tue Sep 20, 2022 2:14 pm
by admin
Great that solved this. Having a look at the log files when something does not work as expected should always been one of the first steps.