Page 1 of 2
Problem with rain total.
Posted: Wed Aug 14, 2024 3:24 pm
by lorenz1982
Hello.
After today's update I have a problem with rain.
Today 4.2mm precipitated but only 0.4mm is shown.
Raspberry Pi 3 Model B+
Meteobridge 6.0 (Aug 14 2024, build 3285), FW 1.3
Sorry for my English.
- 1.png (33.06 KiB) Viewed 4639 times
- 2.png (77.01 KiB) Viewed 4639 times
Re: Problem with rain total
Posted: Wed Aug 14, 2024 4:26 pm
by lorenz1982
EDIT:
After a few hours the rain total became right.
What happens?
- 3.png (28.28 KiB) Viewed 4633 times
Re: Problem with rain total
Posted: Thu Aug 15, 2024 6:45 pm
by admin
Thanks for spotting this. I am on travel and will look at it on Sunday.
Re: Problem with rain total
Posted: Sun Aug 18, 2024 4:48 pm
by oncletom17
Hi, it seems I get the same problem.
I thought that was because of my website meteotemplate.
It seems to happen when full hours pass
An example on my website this morning :
- graph_meteobridge_morning
- Capture4.JPG (37.16 KiB) Viewed 4409 times
The graph on meteobridge was OK;
- meteotemplate
- Capture6.JPG (51.2 KiB) Viewed 4409 times
But I've just noticed that this problem is due to my meteobridge.
- meteobridge_rain:total
- Capture8.JPG (38.25 KiB) Viewed 4409 times
The graph is OK:
- graph_meteobridge_afternoon
- Capture9.JPG (74.11 KiB) Viewed 4409 times
Here the hour data (sum = 12.4)
- hour_data
- Capture10.JPG (62.92 KiB) Viewed 4409 times
Re: Problem with rain total
Posted: Sun Aug 18, 2024 4:54 pm
by oncletom17
I can see on my website that the problem happened at 16h00
- meteotemplate_afternoon
- Capture11.JPG (33.71 KiB) Viewed 4406 times
Re: Problem with rain total
Posted: Sun Aug 18, 2024 5:00 pm
by lorenz1982
Today
- IMG_3257.jpeg (597.81 KiB) Viewed 4405 times
Re: Problem with rain total.
Posted: Sun Aug 18, 2024 5:59 pm
by admin
Should be solved with just released update.
Re: Problem with rain total. **solved**
Posted: Mon Aug 19, 2024 4:27 pm
by lorenz1982
Thanks. With the latest update and today's rain it works fine.
Re: Problem with rain total.
Posted: Tue Aug 20, 2024 9:45 pm
by JWR
Just I have the same problem since a few days. I reboot the system, so I get the newest version, but still the problem exists...
- bug Meteobridge.jpg (11.19 KiB) Viewed 4260 times
Re: Problem with rain total. **solved**
Posted: Tue Aug 20, 2024 10:05 pm
by admin
When you send me remote login credentials "info(at)meteobridge.com", I can check. On my system it all looks fine.
Re: Problem with rain total. **solved**
Posted: Tue Aug 20, 2024 10:15 pm
by JWR
I have just send! Thank you!
Re: Problem with rain total (again?)
Posted: Wed Oct 02, 2024 10:14 am
by oncletom17
Hi,
It seems there is still problems with the rain total calculation.
everything is consistent on meteobridge but my personal website recorded additional rainfall, jumping back at 01:00 am. is it possible that meteobridge deleted rainfall to solve the above problem, which was resolved in August?
It seems strange to me that meteotemplate has invented these additional precipitations...
Could you check please?
- graph_meteotemplate.png (25.04 KiB) Viewed 3503 times
- data_meteotemplate.png (65.83 KiB) Viewed 3503 times
- graph_meteobridge.png (36.79 KiB) Viewed 3503 times
- graph_meteobridge_2.png (29.86 KiB) Viewed 3503 times
Re: Problem with rain total. **solved**
Posted: Thu Oct 03, 2024 4:18 pm
by admin
Which SW version are you using? Which platform?
Re: Problem with rain total. **solved**
Posted: Thu Oct 03, 2024 4:48 pm
by oncletom17
admin wrote: Thu Oct 03, 2024 4:18 pm
Which SW version are you using? Which platform?
- Capture d’écran 2024-10-03 164633.png (32.41 KiB) Viewed 3452 times
Re: Problem with rain total. **solved**
Posted: Tue Oct 08, 2024 6:58 am
by oncletom17
And again today...
- Capture d’écran 2024-10-08 065331.png (25.66 KiB) Viewed 3164 times
this case makes me understand the problem: apparently, meteobridge divides by 2 the amount of rain that falls between 00:00 and 01:00 when it's 01:00
Today: 2.4 mm => 1.2 mm
2nd October => 12.8 => 6.4 mm