meteohub.de

I have an issue, maybe can someone help me?

I have installed a nano SD in a VP2 console. The measurements of the stations are visible at the console, but the Meteobridge Nano SD don't show the measurements at the Live Data or at the Min/Max.

I have the ISS at port 6 and Temp/Hum at port 4.

Can that be a problem?
Or could it happen that de batteries are low in the stations?

Does someone know the answer?

Thank you in advance!

Can your reach the GUI of the NANO?
What does it say on "System - Logging" tab?

It does say:

station 0 (Vantage), execution of setup script failed (console is not responding).

(I just changed the ISS to OFF OFF OFF OFF)

So you have an ISS and a separate Temp Hum station then? ISS on TX 6, Temp/Hum Tx ID 4 and these display data on the Console ok?

What does the Nano tab Station>Davis Station Setup with Configure sensors and mapping to transmitters ID's look like?

Does this Nano have a Black or Red strap and what power adapter is being used to power the console?

I just think that it is an problem with the power. So we will check that first and maybe I come back.