meteohub.de

DEUTSCH:
Dieses Update beseitigt eine Reihe von Stabiltätsproblemen in der Interprozesskommunikation verscheidener Meteohub-Dienste. Es wird sehr empfohlen alle installierten 4.6 Meteohub Versionen auf 4.6e zu updaten.

-----------------------
ENGLISH:
This update fixes stability issues in inter-process communication of various Meteohub services. It is highly recommended to update any Meteohub 4.6 installation to 4.6e

-----------------------
Link:
http://www.meteohub.de/joomla/index.php ... &Itemid=29

Hi Boris,
On my Sheeva Auto upate don't work. Meteohub everytime said that undate was done but I've still 4.6d (Build 89).


Mike

Please try again, should now also work for Sheeva.

Keeping my fingers crossed but the runaway cpu load seems to have stopped and no WU Rapid Fire stoppages yet. System uptime 4hr 29min.

I would be happy to try 4.6e as I was experiencing the rapid fire problem with 4.6c, but the auto update on my NSLU2 is downloading 4.6d.

As 4.6e is in experimental status, I just enabled auto update for systems that have 4.6d installed. So it will be two installation steps for you.

I never noticed before but is the system log daemon supposed to exit a few minutes after the system starts up?

Apr 4 23:00:57 (none) syslog.info syslogd started: BusyBox v1.2.1
Apr 4 23:00:57 (none) user.notice kernel: klogd started: BusyBox v1.2.1 (2007.12.25-11:17+0000)
Apr 4 23:00:57 (none) user.notice kernel: Linux version 2.6.21.7 (slug@otto) (gcc version 4.1.2) #1 PREEMPT Mon Dec 24 23:12:24 UTC 2007
Apr 4 23:00:57 (none) user.warn kernel: CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=000039ff
Apr 4 23:00:57 (none) user.warn kernel: Machine: Linksys NSLU2
Apr 4 23:00:57 (none) user.warn kernel: Memory policy: ECC disabled, Data cache writeback
Apr 4 23:00:57 (none) user.debug kernel: On node 0 totalpages: 8192
Apr 4 23:00:57 (none) user.debug kernel: DMA zone: 64 pages used for memmap
Apr 4 23:00:57 (none) user.debug kernel: DMA zone: 0 pages reserved
Apr 4 23:00:57 (none) user.debug kernel: DMA zone: 8128 pages, LIFO batch:0
Apr 4 23:00:57 (none) user.debug kernel: Normal zone: 0 pages used for memmap
Apr 4 23:00:57 (none) user.warn kernel: CPU0: D VIVT undefined 5 cache
Apr 4 23:00:57 (none) user.warn kernel: CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Apr 4 23:00:57 (none) user.warn kernel: CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Apr 4 23:00:57 (none) user.warn kernel: Built 1 zonelists. Total pages: 8128
Apr 4 23:00:57 (none) user.notice kernel: Kernel command line: rtc-x1205.probe=0,0x6f console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=jffs2 rw init=/linuxrc noirqdebug
Apr 4 23:00:57 (none) user.info kernel: IRQ lockup detection disabled
Apr 4 23:00:57 (none) user.warn kernel: PID hash table entries: 128 (order: 7, 512 bytes)
Apr 4 23:00:57 (none) user.warn kernel: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Apr 4 23:00:57 (none) user.warn kernel: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Apr 4 23:00:57 (none) user.info kernel: Memory: 32MB = 32MB total
Apr 4 23:00:57 (none) user.notice kernel: Memory: 30292KB available (1912K code, 153K data, 84K init)
Apr 4 23:00:57 (none) user.debug kernel: Calibrating delay loop... 132.71 BogoMIPS (lpj=663552)
Apr 4 23:00:57 (none) user.warn kernel: Mount-cache hash table entries: 512
Apr 4 23:00:57 (none) user.info kernel: CPU: Testing write buffer coherency: ok
Apr 4 23:00:57 (none) user.info kernel: NET: Registered protocol family 16
Apr 4 23:00:57 (none) user.warn kernel: IXP4xx: Using 16MiB expansion bus window size
Apr 4 23:00:57 (none) user.warn kernel: PCI: IXP4xx is host
Apr 4 23:00:57 (none) user.warn kernel: PCI: IXP4xx Using direct access for memory space
Apr 4 23:00:57 (none) user.info kernel: PCI: bus0: Fast back to back transfers disabled
Apr 4 23:00:57 (none) user.info kernel: dmabounce: registered device 0000:00:01.0 on pci bus
Apr 4 23:00:57 (none) user.info kernel: dmabounce: registered device 0000:00:01.1 on pci bus
Apr 4 23:00:57 (none) user.info kernel: dmabounce: registered device 0000:00:01.2 on pci bus
Apr 4 23:00:57 (none) user.notice kernel: SCSI subsystem initialized
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new interface driver usbfs
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new interface driver hub
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new device driver usb
Apr 4 23:00:57 (none) user.info kernel: Time: OSTS clocksource has been installed.
Apr 4 23:00:57 (none) user.info kernel: NET: Registered protocol family 2
Apr 4 23:00:57 (none) user.warn kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Apr 4 23:00:57 (none) user.warn kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Apr 4 23:00:57 (none) user.warn kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Apr 4 23:00:57 (none) user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Apr 4 23:00:57 (none) user.info kernel: TCP reno registered
Apr 4 23:00:57 (none) user.warn kernel: NetWinder Floating Point Emulator V0.97 (double precision)
Apr 4 23:00:57 (none) user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Apr 4 23:00:57 (none) user.info kernel: io scheduler noop registered
Apr 4 23:00:57 (none) user.info kernel: io scheduler deadline registered (default)
Apr 4 23:00:57 (none) user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Apr 4 23:00:57 (none) user.info kernel: serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
Apr 4 23:00:57 (none) user.info kernel: serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
Apr 4 23:00:57 (none) user.warn kernel: RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
Apr 4 23:00:57 (none) user.info kernel: IXP4XX NPE driver Version 0.3.0 initialized
Apr 4 23:00:57 (none) user.info kernel: NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
Apr 4 23:00:57 (none) user.info kernel: IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Apr 4 23:00:57 (none) user.debug kernel: IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
Apr 4 23:00:57 (none) user.warn kernel: Intel/Sharp Extended Query Table at 0x0031
Apr 4 23:00:57 (none) user.info kernel: Using buffer write method
Apr 4 23:00:57 (none) user.notice kernel: cfi_cmdset_0001: Erase suspend on write enabled
Apr 4 23:00:57 (none) user.debug kernel: erase region 0: offset=0x0,size=0x20000,blocks=64
Apr 4 23:00:57 (none) user.notice kernel: Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
Apr 4 23:00:57 (none) user.notice kernel: 6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Apr 4 23:00:57 (none) user.notice kernel: Creating 6 MTD partitions on "IXP4XX-Flash.0":
Apr 4 23:00:57 (none) user.notice kernel: 0x00000000-0x00040000 : "RedBoot"
Apr 4 23:00:57 (none) user.info kernel: nslu2 mac: 00:18:39:a2:23:07
Apr 4 23:00:57 (none) user.notice kernel: 0x00040000-0x00060000 : "SysConf"
Apr 4 23:00:57 (none) user.notice kernel: 0x00060000-0x00080000 : "Loader"
Apr 4 23:00:57 (none) user.notice kernel: 0x00080000-0x00180000 : "Kernel"
Apr 4 23:00:57 (none) user.notice kernel: 0x00180000-0x007e0000 : "Flashdisk"
Apr 4 23:00:57 (none) user.notice kernel: 0x007e0000-0x00800000 : "FIS directory"
Apr 4 23:00:57 (none) user.warn kernel: npe: searching for firmware...
Apr 4 23:00:57 (none) user.info kernel: npe: found at 0x1c010, IXP425/NPE-B func: 00, rev: 2.1, size: 11964, id: 01000201
Apr 4 23:00:57 (none) user.info kernel: Image loaded to NPE-B Func:0, Rel: 2:1, Status: 82c00000
Apr 4 23:00:57 (none) user.info kernel: Initializing USB Mass Storage driver...
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new interface driver usb-storage
Apr 4 23:00:57 (none) user.info kernel: USB Mass Storage support registered.
Apr 4 23:00:57 (none) user.info kernel: input: ixp4xx beeper as /class/input/input0
Apr 4 23:00:57 (none) user.info kernel: i2c /dev entries driver
Apr 4 23:00:57 (none) user.info kernel: x1205 0-006f: chip found, driver version 1.0.7
Apr 4 23:00:57 (none) user.info kernel: x1205 0-006f: rtc core: registered x1205 as rtc0
Apr 4 23:00:57 (none) user.info kernel: Registered led device: ready
Apr 4 23:00:57 (none) user.info kernel: Registered led device: status
Apr 4 23:00:57 (none) user.info kernel: Registered led device: disk-1
Apr 4 23:00:57 (none) user.info kernel: >Registered led device: disk-2
Apr 4 23:00:57 (none) user.info kernel: TCP cubic registered
Apr 4 23:00:57 (none) user.info kernel: NET: Registered protocol family 1
Apr 4 23:00:57 (none) user.info kernel: NET: Registered protocol family 17
Apr 4 23:00:57 (none) user.info kernel: XScale DSP coprocessor detected.
Apr 4 23:00:57 (none) user.info kernel: x1205 0-006f: setting the system clock to 2010-04-04 23:00:23 (1270422023)
Apr 4 23:00:57 (none) user.warn kernel: VFS: Mounted root (jffs2 filesystem).
Apr 4 23:00:57 (none) user.info kernel: Freeing init memory: 84K
Apr 4 23:00:57 (none) user.warn kernel: PCI: enabling device 0000:00:01.2 (0140 -> 0142)
Apr 4 23:00:57 (none) user.info kernel: ehci_hcd 0000:00:01.2: EHCI Host Controller
Apr 4 23:00:57 (none) user.info kernel: ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
Apr 4 23:00:57 (none) user.info kernel: ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
Apr 4 23:00:57 (none) user.info kernel: ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr 4 23:00:57 (none) user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Apr 4 23:00:57 (none) user.info kernel: hub 1-0:1.0: USB hub found
Apr 4 23:00:57 (none) user.info kernel: hub 1-0:1.0: 5 ports detected
Apr 4 23:00:57 (none) user.debug kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 4 23:00:57 (none) user.warn kernel: PCI: enabling device 0000:00:01.0 (0140 -> 0142)
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.0: OHCI Host Controller
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
Apr 4 23:00:57 (none) user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Apr 4 23:00:57 (none) user.info kernel: hub 2-0:1.0: USB hub found
Apr 4 23:00:57 (none) user.info kernel: hub 2-0:1.0: 3 ports detected
Apr 4 23:00:57 (none) user.warn kernel: PCI: enabling device 0000:00:01.1 (0140 -> 0142)
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.1: OHCI Host Controller
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
Apr 4 23:00:57 (none) user.info kernel: ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
Apr 4 23:00:57 (none) user.info kernel: usb usb3: configuration #1 chosen from 1 choice
Apr 4 23:00:57 (none) user.info kernel: hub 3-0:1.0: USB hub found
Apr 4 23:00:57 (none) user.info kernel: hub 3-0:1.0: 2 ports detected
Apr 4 23:00:57 (none) user.info kernel: usb 1-2: new high speed USB device using ehci_hcd and address 3
Apr 4 23:00:57 (none) user.info kernel: usb 1-2: configuration #1 chosen from 1 choice
Apr 4 23:00:57 (none) user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Apr 4 23:00:57 (none) user.debug kernel: usb-storage: device found at 3
Apr 4 23:00:57 (none) user.debug kernel: usb-storage: waiting for device to settle before scanning
Apr 4 23:00:57 (none) user.info kernel: usb 2-1: new low speed USB device using ohci_hcd and address 2
Apr 4 23:00:57 (none) user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Apr 4 23:00:57 (none) user.notice kernel: scsi 0:0:0:0: Direct-Access ZyRUS mini Swing Plus 1100 PQ: 0 ANSI: 0 CCS
Apr 4 23:00:57 (none) user.notice kernel: SCSI device sda: 3915776 512-byte hdwr sectors (2005 MB)
Apr 4 23:00:57 (none) user.notice kernel: sda: Write Protect is off
Apr 4 23:00:57 (none) user.debug kernel: sda: Mode Sense: 43 00 00 00
Apr 4 23:00:57 (none) user.err kernel: sda: assuming drive cache: write through
Apr 4 23:00:57 (none) user.notice kernel: SCSI device sda: 3915776 512-byte hdwr sectors (2005 MB)
Apr 4 23:00:57 (none) user.notice kernel: sda: Write Protect is off
Apr 4 23:00:57 (none) user.debug kernel: sda: Mode Sense: 43 00 00 00
Apr 4 23:00:57 (none) user.err kernel: sda: assuming drive cache: write through
Apr 4 23:00:57 (none) user.info kernel: sda: sda1 sda2 sda3
Apr 4 23:00:57 (none) user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Apr 4 23:00:57 (none) user.debug kernel: usb-storage: device scan complete
Apr 4 23:00:57 (none) user.info kernel: kjournald starting. Commit interval 5 seconds
Apr 4 23:00:57 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 4 23:00:57 (none) user.info kernel: EXT3 FS on sda1, internal journal
Apr 4 23:00:57 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 4 23:00:57 (none) user.info kernel: IXP4XX Q Manager 0.2.1 initialized.
Apr 4 23:00:57 (none) user.info kernel: ixp4xx_mac driver 0.3.1: eth0 on NPE-B with PHY[1] initialized
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new interface driver hiddev
Apr 4 23:00:57 (none) user.info kernel: hiddev96: USB HID v1.10 Device [Universal Bridge] on usb-0000:00:01.0-1
Apr 4 23:00:57 (none) user.info kernel: usbcore: registered new interface driver usbhid
Apr 4 23:00:57 (none) user.info kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Apr 4 23:00:57 (none) user.info kernel: kjournald starting. Commit interval 5 seconds
Apr 4 23:00:57 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 4 23:00:57 (none) user.info kernel: EXT3 FS on sda3, internal journal
Apr 4 23:00:57 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 4 23:00:57 (none) user.info kernel: Adding 131064k swap on /dev/sda2. Priority:-1 extents:1 across:131064k
Apr 4 23:00:59 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Apr 4 23:00:59 (none) user.debug kernel: Link of eth0 is full-duplex
Apr 4 23:01:02 (none) user.warn kernel: IXP4xx Watchdog Timer: heartbeat 60 sec
Apr 4 23:01:02 (none) user.info kernel: usbcore: registered new interface driver usbserial
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Apr 4 23:01:02 (none) user.info kernel: usbcore: registered new interface driver usbserial_generic
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Apr 4 23:01:02 (none) user.info kernel: usbcore: registered new interface driver pl2303
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101
Apr 4 23:01:02 (none) user.info kernel: usbcore: registered new interface driver cp2101
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Apr 4 23:01:02 (none) user.info kernel: usbcore: registered new interface driver ftdi_sio
Apr 4 23:01:02 (none) user.info kernel: drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Apr 4 23:01:03 (none) user.notice root: restart without recomputation of data (scheduled reboot, manual reboot)
Apr 4 23:01:03 (none) daemon.info init: Entering runlevel: 3
Apr 4 23:01:04 (none) auth.info sshd[1030]: Server listening on 0.0.0.0 port 22.
Apr 4 23:01:08 (none) user.debug kernel: usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hidlog3 rqt 129 rq 6 len 34 ret -75
Apr 4 23:01:09 (none) daemon.crit thttpd[1111]: socket :: - Address family not supported by protocol
Apr 4 23:01:09 (none) daemon.notice thttpd[1111]: thttpd/2.25b 29dec2003 starting on port 80
Apr 4 23:01:09 (none) daemon.warn thttpd[1111]: started as root without requesting chroot(), warning only
Apr 4 23:01:09 (none) daemon.crit thttpdbackup[1117]: socket :: - Address family not supported by protocol
Apr 4 23:01:09 (none) daemon.notice thttpdbackup[1117]: thttpd/2.25b 29dec2003 starting on port 7777
Apr 4 23:01:09 (none) daemon.warn thttpdbackup[1117]: started as root without requesting chroot(), warning only
Apr 4 23:01:09 (none) daemon.notice ntpd[1129]: ntpd 4.2.2p3@1.1577 Sat Feb 9 23:00:06 UTC 2008 (1)
Apr 4 23:01:09 (none) daemon.info ntpd[1130]: precision = 12.000 usec
Apr 4 23:01:10 (none) daemon.info thttpd[1111]: spawned CGI process 1134 for file 'meteolog.cgi'
Apr 4 23:01:10 (none) daemon.debug ntpd[1130]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Apr 4 23:01:10 (none) daemon.info ntpd[1130]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Apr 4 23:01:10 (none) daemon.info ntpd[1130]: Listening on interface lo, 127.0.0.1#123 Enabled
Apr 4 23:01:10 (none) daemon.info ntpd[1130]: Listening on interface eth0, 192.168.0.251#123 Enabled
Apr 4 23:01:10 (none) daemon.info ntpd[1130]: Listening on interface eth0:0, 192.168.1.77#123 Enabled
Apr 4 23:01:10 (none) daemon.info ntpd[1130]: kernel time sync status 0040
Apr 4 23:01:11 (none) cron.info /usr/sbin/cron[1153]: (CRON) STARTUP (fork ok)
Apr 4 23:01:11 (none) cron.info /usr/sbin/cron[1153]: (root.new) ORPHAN (no passwd entry)
Apr 4 23:01:11 (none) cron.info /usr/sbin/cron[1153]: (root.boot) ORPHAN (no passwd entry)
Apr 4 23:01:14 (none) daemon.info thttpd[1111]: spawned CGI process 1196 for file 'meteolog.cgi'
Apr 4 23:01:18 (none) daemon.info thttpd[1111]: spawned CGI process 1198 for file 'meteolog.cgi'
Apr 4 23:01:22 (none) daemon.info thttpd[1111]: spawned CGI process 1200 for file 'meteolog.cgi'
Apr 4 23:01:26 (none) daemon.info thttpd[1111]: spawned CGI process 1202 for file 'meteolog.cgi'
Apr 4 23:01:30 (none) daemon.info thttpd[1111]: spawned CGI process 1204 for file 'meteolog.cgi'
Apr 4 23:01:34 (none) daemon.info thttpd[1111]: spawned CGI process 1206 for file 'meteolog.cgi'
Apr 4 23:01:38 (none) daemon.info thttpd[1111]: spawned CGI process 1208 for file 'meteolog.cgi'
Apr 4 23:01:43 (none) daemon.info thttpd[1111]: spawned CGI process 1210 for file 'meteolog.cgi'
Apr 4 23:01:47 (none) daemon.info thttpd[1111]: spawned CGI process 1212 for file 'meteolog.cgi'
Apr 4 23:01:50 (none) daemon.info thttpd[1111]: spawned CGI process 1214 for file 'meteolog.cgi'
Apr 4 23:01:55 (none) daemon.info thttpd[1111]: spawned CGI process 1216 for file 'meteolog.cgi'
Apr 4 23:01:59 (none) daemon.info thttpd[1111]: spawned CGI process 1218 for file 'meteolog.cgi'
Apr 4 23:02:00 (none) cron.info /USR/SBIN/CRON[1221]: (root) CMD (sleep 8; rm -f /var/run/meteohub/uploads//*)
Apr 4 23:02:00 (none) cron.info /USR/SBIN/CRON[1227]: (root) CMD (/bin/pidof histeval0 || /usr/bin/nice /home/meteohub/histeval0)
Apr 4 23:02:00 (none) cron.info /USR/SBIN/CRON[1225]: (root) CMD (/bin/cat /proc/uptime >/var/run/meteohub/alive)
Apr 4 23:02:00 (none) cron.info /USR/SBIN/CRON[1223]: (root) CMD (/usr/bin/nice /home/meteohub/wmr928eval -c min10 -t -3600 -w /data/weather/ -s /home/meteohub/wmr928eval.conf)
Apr 4 23:02:03 (none) daemon.info thttpd[1111]: spawned CGI process 1235 for file 'meteolog.cgi'
Apr 4 23:02:07 (none) daemon.info thttpd[1111]: spawned CGI process 1245 for file 'meteolog.cgi'
Apr 4 23:02:11 (none) daemon.info thttpd[1111]: spawned CGI process 1251 for file 'meteolog.cgi'
Apr 4 23:02:14 (none) user.debug kernel: usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hidlog3 rqt 33 rq 9 len 8 ret -110
Apr 4 23:02:15 (none) daemon.info thttpd[1111]: spawned CGI process 1256 for file 'meteolog.cgi'
Apr 4 23:02:19 (none) daemon.info thttpd[1111]: spawned CGI process 1262 for file 'meteolog.cgi'
Apr 4 23:02:23 (none) daemon.info thttpd[1111]: spawned CGI process 1266 for file 'meteolog.cgi'
Apr 4 23:02:27 (none) daemon.info thttpd[1111]: spawned CGI process 1272 for file 'meteolog.cgi'
Apr 4 23:02:31 (none) daemon.info thttpd[1111]: spawned CGI process 1276 for file 'meteolog.cgi'
Apr 4 23:02:35 (none) daemon.info thttpd[1111]: spawned CGI process 1280 for file 'meteolog.cgi'
Apr 4 23:02:40 (none) daemon.info thttpd[1111]: spawned CGI process 1284 for file 'meteolog.cgi'
Apr 4 23:02:44 (none) daemon.info thttpd[1111]: spawned CGI process 1288 for file 'meteolog.cgi'
Apr 4 23:02:48 (none) daemon.info thttpd[1111]: spawned CGI process 1293 for file 'meteolog.cgi'
Apr 4 23:02:51 (none) daemon.info thttpd[1111]: spawned CGI process 1298 for file 'meteolog.cgi'
Apr 4 23:02:56 (none) daemon.info thttpd[1111]: spawned CGI process 1302 for file 'meteolog.cgi'
Apr 4 23:03:00 (none) daemon.info thttpd[1111]: spawned CGI process 1306 for file 'meteolog.cgi'
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1309]: (root) CMD (sleep 8; rm -f /var/run/meteohub/uploads//*)
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1315]: (root) CMD (/bin/pidof wswinimport || /usr/bin/nice /home/meteohub/wswinimport 2>>/data/log/messages)
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1311]: (root) CMD (/usr/bin/nice /home/meteohub/wmr928eval -c hour1 -t -7200 -w /data/weather/ -s /home/meteohub/wmr928eval.conf)
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1319]: (root) CMD (/bin/pidof histeval0 || /usr/bin/nice /home/meteohub/histeval0)
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1317]: (root) CMD (/bin/cat /proc/uptime >/var/run/meteohub/alive)
Apr 4 23:03:00 (none) cron.info /USR/SBIN/CRON[1313]: (root) CMD (/usr/bin/nice /home/meteohub/wmr928eval -c min30 -t -7200 -w /data/weather/ -s /home/meteohub/wmr928eval.conf)
Apr 4 23:03:04 (none) daemon.info thttpd[1111]: spawned CGI process 1333 for file 'meteolog.cgi'
Apr 4 23:03:08 (none) daemon.info thttpd[1111]: spawned CGI process 1337 for file 'meteolog.cgi'
Apr 4 23:03:12 (none) daemon.info thttpd[1111]: spawned CGI process 1342 for file 'meteolog.cgi'
Apr 4 23:03:16 (none) daemon.info thttpd[1111]: spawned CGI process 1346 for file 'meteolog.cgi'
Apr 4 23:03:20 (none) daemon.info thttpd[1111]: spawned CGI process 1350 for file 'meteolog.cgi'
Apr 4 23:03:24 (none) daemon.info thttpd[1111]: spawned CGI process 1354 for file 'meteolog.cgi'
Apr 4 23:03:28 (none) daemon.info thttpd[1111]: spawned CGI process 1358 for file 'meteolog.cgi'
Apr 4 23:03:32 (none) daemon.info thttpd[1111]: spawned CGI process 1362 for file 'meteolog.cgi'
Apr 4 23:03:36 (none) daemon.info thttpd[1111]: spawned CGI process 1366 for file 'meteolog.cgi'
Apr 4 23:03:40 (none) daemon.info thttpd[1111]: spawned CGI process 1370 for file 'meteolog.cgi'
Apr 4 23:03:44 (none) daemon.info thttpd[1111]: spawned CGI process 1374 for file 'meteolog.cgi'
Apr 4 23:03:49 (none) daemon.info thttpd[1111]: spawned CGI process 1378 for file 'meteolog.cgi'
Apr 4 23:03:53 (none) daemon.info thttpd[1111]: spawned CGI process 1383 for file 'meteolog.cgi'
Apr 4 23:03:57 (none) daemon.info thttpd[1111]: spawned CGI process 1388 for file 'meteolog.cgi'
Apr 4 23:04:00 (none) cron.info /USR/SBIN/CRON[1393]: (root) CMD (sleep 8; rm -f /var/run/meteohub/uploads//*)
Apr 4 23:04:00 (none) cron.info /USR/SBIN/CRON[1397]: (root) CMD (/bin/pidof histeval0 || /usr/bin/nice /home/meteohub/histeval0)
Apr 4 23:04:01 (none) cron.info /USR/SBIN/CRON[1395]: (root) CMD (/bin/cat /proc/uptime >/var/run/meteohub/alive)
Apr 4 23:04:01 (none) daemon.info thttpd[1111]: spawned CGI process 1404 for file 'meteolog.cgi'
Apr 4 23:04:05 (none) daemon.info thttpd[1111]: spawned CGI process 1408 for file 'meteolog.cgi'
Apr 4 23:04:09 (none) daemon.info thttpd[1111]: spawned CGI process 1413 for file 'meteolog.cgi'
Apr 4 23:04:13 (none) daemon.info thttpd[1111]: spawned CGI process 1417 for file 'meteolog.cgi'
Apr 4 23:04:17 (none) daemon.info thttpd[1111]: spawned CGI process 1421 for file 'meteolog.cgi'
Apr 4 23:04:21 (none) daemon.info thttpd[1111]: spawned CGI process 1425 for file 'meteolog.cgi'
Apr 4 23:04:25 (none) daemon.info thttpd[1111]: spawned CGI process 1429 for file 'meteolog.cgi'
Apr 4 23:04:29 (none) daemon.info thttpd[1111]: spawned CGI process 1433 for file 'meteolog.cgi'
Apr 4 23:04:34 (none) daemon.info thttpd[1111]: spawned CGI process 1437 for file 'meteolog.cgi'
Apr 4 23:04:38 (none) daemon.info thttpd[1111]: spawned CGI process 1441 for file 'meteolog.cgi'
Apr 4 23:04:42 (none) daemon.info thttpd[1111]: spawned CGI process 1445 for file 'meteolog.cgi'
Apr 4 23:04:46 (none) daemon.info thttpd[1111]: spawned CGI process 1449 for file 'meteolog.cgi'
Apr 4 23:04:57 (none) daemon.info thttpd[1111]: spawned CGI process 1457 for file 'meteolog.cgi'
Apr 4 23:05:00 (none) cron.info /USR/SBIN/CRON[1462]: (root) CMD (sleep 8; rm -f /var/run/meteohub/uploads//*)
Apr 4 23:05:01 (none) cron.info /USR/SBIN/CRON[1465]: (root) CMD (/home/meteohub/wmr928fullevalwrapper >/dev/null 2>>/data/log/messages)
Apr 4 23:05:01 (none) cron.info /USR/SBIN/CRON[1470]: (root) CMD (/bin/pidof histeval0 || /usr/bin/nice /home/meteohub/histeval0)
Apr 4 23:05:01 (none) cron.info /USR/SBIN/CRON[1467]: (root) CMD (/bin/pidof histeval1 || /usr/bin/nice /home/meteohub/histeval1)
Apr 4 23:05:01 (none) cron.info /USR/SBIN/CRON[1472]: (root) CMD (/bin/cat /proc/uptime >/var/run/meteohub/alive)
Apr 4 23:05:01 (none) cron.info /USR/SBIN/CRON[1471]: (root) CMD (sleep 120; /home/meteohub/meteonet)
Apr 4 23:05:01 (none) daemon.info thttpd[1111]: spawned CGI process 1481 for file 'meteolog.cgi'
Apr 4 23:05:06 (none) daemon.info thttpd[1111]: spawned CGI process 1496 for file 'meteolog.cgi'
Apr 4 23:05:10 (none) daemon.info thttpd[1111]: spawned CGI process 1503 for file 'meteolog.cgi'
Apr 4 23:05:14 (none) daemon.info thttpd[1111]: spawned CGI process 1510 for file 'meteolog.cgi'
Apr 4 23:05:18 (none) daemon.info thttpd[1111]: spawned CGI process 1514 for file 'meteolog.cgi'
Apr 4 23:05:22 (none) daemon.info thttpd[1111]: spawned CGI process 1519 for file 'meteolog.cgi'
Apr 4 23:05:26 (none) daemon.info thttpd[1111]: spawned CGI process 1523 for file 'meteolog.cgi'
Apr 4 23:05:31 (none) daemon.info thttpd[1111]: spawned CGI process 1527 for file 'meteolog.cgi'
Apr 4 23:05:35 (none) daemon.info thttpd[1111]: spawned CGI process 1531 for file 'meteolog.cgi'
Apr 4 23:05:39 (none) daemon.info thttpd[1111]: spawned CGI process 1535 for file 'meteolog.cgi'
Apr 4 23:05:43 (none) daemon.info thttpd[1111]: spawned CGI process 1539 for file 'meteolog.cgi'
Apr 4 23:05:47 (none) daemon.info thttpd[1111]: spawned CGI process 1543 for file 'meteolog.cgi'
Apr 4 23:05:51 (none) daemon.info thttpd[1111]: spawned CGI process 1547 for file 'meteolog.cgi'
Apr 4 23:05:55 (none) daemon.info thttpd[1111]: spawned CGI process 1551 for file 'meteolog.cgi'
Apr 4 23:05:59 (none) daemon.info thttpd[1111]: spawned CGI process 1557 for file 'meteolog.cgi'
Apr 4 23:06:00 (none) user.debug kernel: usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hidlog3 rqt 33 rq 9 len 8 ret -110
Apr 4 23:06:01 (none) cron.info /USR/SBIN/CRON[1562]: (root) CMD (sleep 8; rm -f /var/run/meteohub/uploads//*)
Apr 4 23:06:01 (none) cron.info /USR/SBIN/CRON[1564]: (root) CMD (sleep 0; /srv/www/meteograph.cgi text all>/var/run/meteohub/all-sensors0.txt; /srv/www/cgi-bin/stamp.cgi cp "/var/run/meteohub/all-sensors0.txt" "/var/run/meteohub/perm/all-sensors"; /srv/www/cgi-bin/stamp.cgi cp "/var/run/meteohub/all-sensors0.txt" "/data/myweb/uploads/all-sensors"; /srv/www/cgi-bin/stamp.cgi mv "/var/run/meteohub/all-sensors0.txt" "/var/run/meteohub/uploads/all-sensors")
Apr 4 23:06:01 (none) cron.info /USR/SBIN/CRON[1568]: (root) CMD (/bin/cat /proc/uptime >/var/run/meteohub/alive)
Apr 4 23:06:01 (none) cron.info /USR/SBIN/CRON[1570]: (root) CMD (/bin/pidof histeval0 || /usr/bin/nice /home/meteohub/histeval0)
Apr 4 23:06:01 (none) cron.info /USR/SBIN/CRON[1566]: (root) CMD (/bin/pidof wswinimport || /usr/bin/nice /home/meteohub/wswinimport 2>>/data/log/messages)
Apr 4 23:06:04 (none) daemon.info thttpd[1111]: spawned CGI process 1584 for file 'meteolog.cgi'
Apr 4 23:06:06 (none) syslog.info System log daemon exiting.

that is normal behavior. syslog is very verbose and does produce a lot of wear on the flash card. Therefore, Meteohub does halt this after some minutes.

My sheeva has since 4.6d no high cpu load anymore. But I can´t say anything about the rapidfire issue.

No problems here with Rapidfire updates since 4.6e.

That makes sense...I'd just never noticed it before.

Rapid Fire hasn't stopped yet. System Load seems acceptable. The system hasn't gone unresponsive yet. I do note that occasionally when the System Info page refreshes the page is blank. Manual refresh makes it come back ok.

Running 4.6e on my NSLU2 for over 24 hours now, so far the 4.6c WU rapid fire issue has not reappeared.

Also running 4.6e, all seems fine so far, only running 4.6e for about 5 hoours so far..... Mike

Judging from your feedback 4.6e finally did the trick.

It is an official release now, available for manual download and/or auto update.