meteohub.de

For some reason I just got a new Sheeva Plug box and I have connected to the network and its ethernet is working while powering up but then its 2 yellow or green leds are off and I cant find it with the IP scanner (the status lights are on solid

If I unplug the power cord the Sheeva Plug will start and get both status lights solid and the ethernet led work for about 30 seconds and the turn off HELP

I unplug the power cord last night of the Sheeva Plug and left it overnight and replug it this morning the 2 status lights are red and blue solid and got the yellow-green lights of the ethernet port flashed for about 1 minute during powering up and then no more... what is wrong here? HELP!

When setting up a SheevaPlug to become a Meteohub you have to follow these instructions: http://wiki.meteohub.de/Setup_SheevaPlug

Without telling us at what step you did fail, no one will be able to help you.

Hola Boris I bought it preconfigured as Weather2Hub from Ambient Weather I just followed the instructions insert SD, connect the ethernet cable to router and connect the power cord to wall plug. Waited for lights to become solid (red/blue) and use the IP Scan software and it is not showing listed nor the ethernet port yellow-green led lights are on.... HELP

Please try "reading the Blinks" from the instructions linked above to get the IP.