Page 1 of 1
Air-cam won't recover on its own after power loss **solved**
Posted: Mon Sep 15, 2014 3:54 am
by steviebaby59
Ever since the upgrade of AirCams with latest firmware 3.0.7, I am having an issue. Whenever my meteobridge takes a power hit, (which is happening a lot with the storms we are having) I have to manually initialize my Aircam by selecting Save on the Select Station tab. If I don't do this every time, my Air-cam won't work. It always recovered before without having to do this.
Re: Air-cam won't recover on it's own after power is lost
Posted: Mon Sep 15, 2014 4:33 pm
by steviebaby59
I reset my unit back to version 2.2. It's working fine now.
Re: Air-cam won't recover on it's own after power is lost
Posted: Tue Sep 16, 2014 11:42 am
by tones
I also have aircam with firmware 3.0.7 and whether with meteobridge 2.2 or 2.3 firmware I get
Initialization of AirCam successfully done
Error: AirCam Web Interface set to HTTPS. Meteobridge cannot handle that, please set back to HTTP
Re: Air-cam won't recover on it's own after power is lost
Posted: Tue Sep 16, 2014 12:27 pm
by tones
Update:
Updated to 2.3 again and camera initiliased and accessed.
Re: Air-cam won't recover on it's own after power is lost
Posted: Tue Sep 16, 2014 6:11 pm
by steviebaby59
I updated to version 2.3 on last reboot. Same results. Air-Cam would not initialize until I manually forced it.
Re: Air-cam won't recover on it's own after power is lost
Posted: Tue Sep 16, 2014 6:44 pm
by admin
There is a problem with DIR-505 hardware on this. Do you have a DIR-505?
Re: Air-cam won't recover on it's own after power is lost
Posted: Wed Sep 17, 2014 3:19 pm
by steviebaby59
I'm using the TP-LINK TL-MR3020 platform.
Re: Air-cam won't recover on it's own after power is lost
Posted: Wed Sep 17, 2014 7:23 pm
by admin
Should be fixed with just released update for MR3020, MR3040, WR703N. DIR-505 is still in the works.
Re: Air-cam won't recover on it's own after power is lost
Posted: Wed Sep 17, 2014 7:57 pm
by steviebaby59
I updated and rebooted. Air-cam still would not come back until I forced it. Don't know what else I can do on my end.
Re: Air-cam won't recover on it's own after power is lost
Posted: Wed Sep 17, 2014 10:59 pm
by jmontamat
I updated and rebooted MR3020, aircam v1.2 working properly
Re: Air-cam won't recover on it's own after power is lost
Posted: Thu Sep 18, 2014 12:27 am
by admin
New version uploaded. Please reboot. Should work now on all platforms.
Re: Air-cam won't recover on it's own after power is lost
Posted: Thu Sep 18, 2014 2:41 pm
by steviebaby59
I did update and reboot. It seems to be working fine now. THANKS!
