meteohub.de

Hi!
After the latest reboots, it seems that not even the sensors are seen.
Can be concluded that I face a hardware problem?
Thank you!

Hi
On both devices is the latest software version, I rebooted them in 2021.
The distance is not a problem, less than 5-6m and worked without any problems for a couple of years.

Hi

Setup:
I am running two Meteobridge devices on my Davis Vantage Vue station.
One is based on TL-MR3020 and it is connected via WeatherLinkIP.
The other one is Meteobridge PRO and it is connected directly to the ISS.
The PRO device located close to the Vantage Vue console.
Both of them are ...

Thank you for your explanations and patience!

In your first reply you said:

Mattk wrote: ↑
If I run that line as is I get
2018-11-02 06:10:25,,0.0,0.0,0.0,0.0,902.8

You see you get the total rain figure, this kind of result I am looking for.
The question is why is working on your system and not on mine?

It is a manual export of the previous day at 1-hour resolution.

The template it is:



# DateTime: [YYYY]-[MM]-[DD] [hh]:[mm]:[ss]
# Temperature Avg: [th0temp-avg.2]
# Rain Rate Avg ?? min: [rain0rate-avg.1]
# Rain Rate Avg 60 min: [rain0rate-avg60.1]
# Rain Total Today: [rain0total-daysum]
# Rain ...

I partially agree with your remarks.
But I started this topic with a different problem that it doesn't have anything to do with average values, I am not able to retrieve following precipitation data:
[rain0total-daysum] - total precipitation for today
[rain0total-ydaysum.1] - total precipitation for ...

a) I made a factory reset of the device and I reconfigured it from scratch.
b) I deleted all the sensors database to avoid any legacy from the old configuration and I asked for its reconstruction.
c) I let the system to achieve data for some hours.

After running the export template there is no ...

Hi!
Thank you for your patience!

1. Regarding your observation of temperature tag.
I made an export template with the following structure:

$ #[YYYY]-[MM]-[DD] [hh]:[mm]:[ss],[th0temp-avg.2:],[th0temp-avg1.2:],[th0temp-avg5.2:],[th0temp-avg10.2:],[th0temp-avg20.2:],[th0temp-avg60.2:]
[YYYY]-[MM ...

Hi,
For debugging purposes, I am using a reduced template form and it looks like this:

# DateTime: [YYYY]-[MM]-[DD] [hh]:[mm]:[ss]
# Temperature Avg: [th0temp-avg.2:]
# Rain Rate Avg10 min: [rain0rate-avg10]
# Rain Total Today: [rain0total-daysum]
# Rain Total Yesterday: [rain0total-ydaysum.1 ...

I was not able to get the connection with RF Sens to -80db, but the connection successfully as returned to -90db.
Below are the Live Data with RF Sens -90db.

The distance between Meteobridge and ISS it is around 5 meters.
I didn't face any issue in the last month since I have powered on for the first time.
In the last hour it seems that I got back some valid rf signals - 26 valid records.

I will follow your instructions and I will try RF Sens to -80db.

Hi,
During the tests for upgrading from Meteobridge to Meteobridge PRO (red cap), I lost, apparently without reason, the connection with Vantage VUE station.
The connection with ISS was good since the very first moment but looking in the records from past hours the valid rf signal was going up and ...

Hi to all,

After five years on Meteobridge based on TL-MR3020, I upgraded to Meteobridge PRO (red cap).
Now I try to struggle to understand its internal mechanisms.
For the beginning, I try to translate the functionality of the old one.
I tried to export on one-minute resolution, using a template ...