meteohub.de

I already wrote in my first post that I did a reset. Nevertheless, thanks for the tip about backing up the configuration. I didn't know about it, but it might be useful at some point.

However, the WIKI said that the data on the USB stick would not be affected by the reset.

As already written, I ...

When you force the MB PRO into REBOOT WIFI AP mode (is selected via pressing button behind pinhole), Meteobridge should show up with its own WLAN where you can connect with your laptop. Being there you can enter all credentials needed for LAN oder WLAN access in your network. When you press "save ...

When you force the MB PRO into REBOOT WIFI AP mode (is selected via pressing button behind pinhole), Meteobridge should show up with its own WLAN where you can connect with your laptop. Being there you can enter all credentials needed for LAN oder WLAN access in your network. When you press "save ...

Thanks for your help
Ok, I select Reboot WIFI AP>Display shows Reboot Wifi Access Point>AP but does not start.
I do a cold start>MB starts as AP>IP address 192.168.1.1>I start Chromium Web Browser when I enter the IP of the AP I get here and no further
Bildschirmfoto vom 2023-09-03 22-26-05.png ...

What do you think I do all the time? Except for the cloud option, I have already tested everything 3 times. I think the cloud option makes no sense in my case.
I have an IP for the MB, but I can't get to the web interface.

I'm grateful for any help, but if you can't help me then just leave it. They ...

Yes, the red LED flashes quickly.

Internet connection is not a requirement to access the web interface.
As I said, I can't get to the web interface, maybe you have an idea about this?

Yes no change.

The MB pro red is connected directly to the router with a cable. The MB is also recognized by the router. IP address is 192.168.160.12.
The browser then asks for a username and password. So in factory mode twice meteobridge.
Then http://192.168.160.12/cgi-bin/meteobridge.cgi appears
and
Meteobridge ...

Router is ok, everything online. Yes, it is strange that the 2nd LED flashes, but I can access the Internet via the router. The other options Reboot Lan Client and Reboot Wifi AP do not change anything either.
It then appears on the display "Reboot Lan Client" without any progress as if it crashed.

After a power failure, I was no longer able to reach the MB pro red. I have now done a factory reset.
When I enter the IP address, I'm on the landing page. The 2nd LED flashes and I can't get any further.
The SSh access also works, but what can I do with it?
I'm grateful for any help

Hello, I can log into the MB Pro red in Firefox and then this message comes up:
"The CGI process did not produce any response"
I then did a hard start, same error message. Also reboot with:
"http://ip-of-your-meteobridge/cgi-bin/system.cgi?reboot"
same error message.
The red light lights up on the ...

I just wanted to get in touch and everything is fine.
The 16GB stick was recognized and the data from the 1GB stick is now on it.
Many thanks to @Gyvate for the extensive and helpful explanation.
And also to the @admin, no help was needed at the moment, but the MB-pro is really a great little machine.

Unfortunately, it took a very long time until I got the new USB.

I have now installed a 16GB NANDDURA USB stick internally. He also creates a database, but when restoring or backing up the stored data MB reports:
Database Error: Cannot prepare read tables (0 tries, 64ms): database disk image is ...

Thanks for the information. The 8 GB ATP NANO DURA industrial version 43€. Can be used for at least 10 years.

My internal memory only has 22 Mb of space left. I still don't know how to delete old data?
I activated "automatically delete after 30 days" under System>Administration. But didn't free up ...