Hardware version ALIX.1D vs ALIX.3D

[Hathor27]

Hi there,

my Meteohub system info says: Linux Kernel: 2.6.24 997 BogoMIPS, 248 MB RAM, ALIX.1D (500 MHz)
But as I recognize the mechanical dimensions and its case it looks rather than an ALIX.3D...

How can I verify what hardware I run on really? Where gets Meteohub the system info from?
Thanks a lot in advance

[admin]

Meteohub cant distinguish between these two boxes. It can tell a 3D2 from a 1D, but not a 3D3 from a 1D.
If anyone having an Idea how to find out, I would be happy to make use of it in next update.

[Hathor27]

As a work-around, couldn't you setup a txt-file with version number in it?
If the file exists, you read it, if not, you take the standard response of the unit

[YJB]

Just a wild guess, this is from my 1D:

Code: Select all

meteohub:/# cat /proc/devices
Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 14 sound
 29 fb
116 alsa
128 ptm
136 pts
180 usb
188 ttyUSB
189 usb_device
252 rtc
253 cs5535_gpio
254 usb_endpoint

Block devices:
  1 ramdisk
  3 ide0
  7 loop
254 device-mapper

Also, maybe there are additional modules loaded because the HW is slightly different:

Code: Select all

meteohub:/# lsmod
Module                  Size  Used by
battery                13700  0
cp2101                 13188  0
pl2303                 19972  0
labjacku3               9476  0
rtc_cmos                7968  0
rtc_core               17432  1 rtc_cmos
rtc_lib                 3072  1 rtc_core
ipv6                  230372  26
dm_snapshot            16928  0
dm_mirror              20608  0
dm_mod                 54724  2 dm_snapshot,dm_mirror
loop                   16260  0
evdev                  10880  0
parport_pc             26148  0
parport                33352  1 parport_pc
ac                      6148  0
button                  8464  0
psmouse                36368  0
serio_raw               6660  0
geode_aes               6020  0
blkcipher               6660  1 geode_aes
snd_cs5535audio        14140  0
ftdi_sio               34952  1
snd_ac97_codec         92964  1 snd_cs5535audio
ac97_bus                2176  1 snd_ac97_codec
usbserial              31848  5 cp2101,pl2303,ftdi_sio
snd_pcm                69640  2 snd_cs5535audio,snd_ac97_codec
snd_timer              20868  1 snd_pcm
cs5535_gpio             5208  0
geode_rng               2432  0
snd                    47588  4 snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_timer
soundcore               7264  1 snd
snd_page_alloc         10120  2 snd_cs5535audio,snd_pcm
pcspkr                  3072  0
rtc                    12828  0
ext3                  120712  2
jbd                    39700  1 ext3
ide_disk               15488  4
ata_generic             7556  0
libata                145136  1 ata_generic
scsi_mod              141836  1 libata
generic                 4484  0 [permanent]
ohci_hcd               21892  0
ehci_hcd               32140  0
amd74xx                 8848  0 [permanent]
usbcore               126316  8 cp2101,pl2303,labjacku3,ftdi_sio,usbserial,ohci_
hcd,ehci_hcd
ide_core              107224  3 ide_disk,generic,amd74xx
via_rhine              23048  0
mii                     5248  1 via_rhine
thermal                16028  0
processor              28720  1 thermal
fan                     4868  0

So, one might run the same commands on a 3D3 and look for differences.

[Hathor27]

My 3D3 says:

Code: Select all

meteohub:~# cat /proc/devices
Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 14 sound
 29 fb
116 alsa
128 ptm
136 pts
180 usb
188 ttyUSB
189 usb_device
252 rtc
253 cs5535_gpio
254 usb_endpoint

Block devices:
  1 ramdisk
  3 ide0
  7 loop
254 device-mapper

and

Code: Select all

meteohub:~# lsmod
Module                  Size  Used by
battery                13700  0
ftdi_sio               34952  0
pl2303                 19972  0
labjacku3               9476  0
rtc_cmos                7968  0
rtc_core               17432  1 rtc_cmos
rtc_lib                 3072  1 rtc_core
ipv6                  230372  24
dm_snapshot            16928  0
dm_mirror              20608  0
dm_mod                 54724  2 dm_snapshot,dm_mirror
loop                   16260  0
evdev                  10880  0
ac                      6148  0
button                  8464  0
geode_aes               6020  0
blkcipher               6660  1 geode_aes
snd_cs5535audio        14140  0
cp2101                 13188  2
snd_ac97_codec         92964  1 snd_cs5535audio
ac97_bus                2176  1 snd_ac97_codec
usbserial              31848  7 ftdi_sio,pl2303,cp2101
snd_pcm                69640  2 snd_cs5535audio,snd_ac97_codec
snd_timer              20868  1 snd_pcm
cs5535_gpio             5208  0
snd                    47588  4 snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_timer
geode_rng               2432  0
soundcore               7264  1 snd
snd_page_alloc         10120  2 snd_cs5535audio,snd_pcm
pcspkr                  3072  0
rtc                    12828  0
ext3                  120712  2
jbd                    39700  1 ext3
ide_disk               15488  4
ata_generic             7556  0
libata                145136  1 ata_generic
scsi_mod              141836  1 libata
generic                 4484  0 [permanent]
ohci_hcd               21892  0
ehci_hcd               32140  0
amd74xx                 8848  0 [permanent]
usbcore               126316  8 ftdi_sio,pl2303,labjacku3,cp2101,usbserial,ohci_hcd,ehci_hcd
ide_core              107224  3 ide_disk,generic,amd74xx
via_rhine              23048  0
mii                     5248  1 via_rhine
thermal                16028  0
processor              28720  1 thermal
fan                     4868  0

Can anybody espy any 3D3- or 1D-specific headword?

[Hathor27]

...
New approach: Would there be a way to test the amount and function of LED's

[Hathor27]

...
and I found something here: They somehow detect ALIX.2 and ALIX.3 systems:
https://dev.openwrt.org/browser/trunk/t ... tton.patch

Is any crack out there knowing to deal with this code?