Raspberry Pi 3

[schlosser]

Guten Tag
Hat schon maljemand die Software auf einem raspberry pi 3 zum laufen bekommen?

liebe Grüsse Stefan

[blacklistedcard]

Is there any image for the Raspberry PI 3?

[blacklistedcard]

Looking forward to an PI 3 image. It would have the wifi built-in

[admin]

I have one here, but currently no time to do a port. Will take some more time, sorry...

[Spi]

Looking forward to an PI 3 image, too.
May it is possible to support you, or exists a workarround?

Greetings, Spi

[Manhart]

Any news about the image for Raspberry 3 ?

[Manhart]

I moved my current Meteohub 5.0q from my Raspberry Pi 2 to my new Raspberry Pi 3 with the following steps:

• 1) Download the latest image 5.0p from the website
  2) Install image on a new SD card
  3) Put SD card in a Raspberry Pi 1 or 2
  4) Connect only network and power to the Raspberry Pi
  5) Wait for the installation of Meteohub
  6) Connect with ssh to the Rapsberry Pi
  7) Run: apt-get update
  8] Run: apt-get upgrade
  9) Run: rpi-update
  10) Reboot the Raspberry
  11) Check, if the system runs fine
  12) Switch off the system
  13) Move the SD card to the new Raspberry Pi 3
  14) Start the new Raspberry Pi 3 with the new SD card from the old Raspberry Pi
  15) The system starts fine on the new Raspberry Pi 3
  16) Transfer all data and parameters from the old Meteohub to the new one including the transfer of the license

I used this procedure to avoid problems with my running system. I hope this helps others to move the system to the Raspberry Pi 3.

Regards

Matthias