Problem with Davis + Belfryboy Clone USB logger + Meteohub

[sv2bzq]

Hi.
I have a Davis weather station united a one Belfryboy Clone USB logger and a one Meteohub .

Everything works fine but has three days that has not Data on SENSORS Card

and log Card writes :

I did RESTART , start - stop Data Logging Process but nothing .
connecting one Meteobridge on the door of 22222 to Meteohub and work fine the Meteobridge

Can you help me .

[Wessel]

My case is a little bit different. Meteohub see that there's a station conected but no sensors are shown on sensors page.

Sem título-2.png (118.37 KiB) Viewed 4710 times

Sem título-1.png (95.54 KiB) Viewed 4710 times

My hardware is a Davis Vantage Pro 2 6162 + Belfryboy Clone USB logger + Raspberry Pi 3 Model B.

[admin]

Settings look ok. I guess the Davis Console has hung-up by a logger inserted during operation.
Power-cycle the console and data should come in fine again.

[Wessel]

What I did was connect my Meteohub in another Davis 6152, configure all things and then connect again on the other Davis with Belfryboy Clone USB logger. Now it's working fine.

[admin]

Sometimes the USB logger hangs when it is plugged in to a powered console.
Therefore, the itself logger might be still fine.