Weather34 TEMPLATE

[meteolive57290]

Hello
I just updated the template ok just a little problem !
http://valdefench57sgz.franceserv.com/pws/index.php

i have a PurpleAir sensor in operation I have recorded the device ID but no report displayed on the block ?
an idea ??
thanks in advance, have a nice day
best regards
fto

[weatherist34]

hello you can use the update simple file or just replace the weather34-airquality.php file

http://www.mediafire.com/file/css9rkizv ... 0.zip/file

just tested with your PA ID 40453

Screenshot at Mar 31 13-22-45.png (19.91 KiB) Viewed 5646 times

[meteolive57290]

thx Brian just perfect ! best regards fto

[xray77]

Hello, Brian,
I have a question of understanding: You have pointed out that the Nano-SD-version should not run together with the stand-alone version.
I have a Nano-SD, in which the Weather34 template is already integrated, but which probably won't get any updates and is not as freely configurable. If I switch off this integrated template (set update interval to "none" in weather networks), can I use the standalone version on my external web server without overloading Meteobridge?
Thank you for the information and best regards, stay healthy!

[weatherist34]

Yes absolutely no problem providing you only use one version not multiple versions simultanousley .( yes I am going to drill that message home )

to setup Standalone Version 4.34 with 4 simple methods required to be set in the meteobridge services scroll down

https://weather34.com/homeweatherstatio ... alone.html


its that easy to be up and running . 4 simple steps .

you can also apply future updates/fixes using the updater in the bottom of the setup screen once installed full download . no need to go through setup and reinstall each time.

the updater just simply is a zip that is required to be uploaded to your server where template resides . the updater will find the relevant update file

all small update files are dated example current small update is named standalone-update-31-03-2020.zip

bonus make regular backups prior to updating or preserve your chart data for later use/transfer etc

full downloads always contain the latest updates/fixes

Screenshot at Mar 31 14-17-43.png (91.92 KiB) Viewed 5639 times

Brian

[rzelle-K1TTC]

Hi Brian,
When I used the update function in setup selecting the standalone-update-31-03-2020.zip file 3 files did not update so I copied them over manually. After manual copy the Almanac is fixed.
weather34-updater, weather34-airquality, and updater-almanac
Thank You!

73s
..Ron

[weatherist34]

that doesnt make sense as the update file has more than 3 files , just tested here and everything updated as expected .. feel a server headache coming on .. can only test locally or on ICDsoft hosted server. 2 large amber nectars please ..

[rzelle-K1TTC]

Sorry to bring it on ..

The update process indicated it completed successfully but when I checked the Almanac after refreshing a few time the 2 modules were not appearing so I used winmerge to compare the an extracted .zip directory to my console2 directory and it indicated the 3 files were not updated.

BTW Winmerge and the github app are what I had been using to keep my version updated.

???

..Ron

[weatherist34]

think Ive manage to replicate this locally it is my MacBook laptop when zipping up it creates a folder/permission . can you try this simple update

https://www.mediafire.com/file/css9rkiz ... 0.zip/file

it won't update anything apart from the info.html I can check from here if it works for you . the info.html currently on yours quotes
"Weather34 CONSOLE 4.34"
Console Version 4.34 https://weather34.com

if the update performs as expected
it will show
"Weather34 Stand Alone 4.34"
Stand Alone Version 4.34 https://weather34.com

info is viewed by clicking the bottom right copyright logo

[prestwickwx]

think Ive manage to replicate this locally it is my MacBook laptop when zipping up it creates a folder/permission . can you try this simple update

https://www.mediafire.com/file/css9rkiz ... 0.zip/file

it won't update anything apart from the info.html I can check from here if it works for you . the info.html currently on yours quotes
"Weather34 CONSOLE 4.34"
Console Version 4.34 https://weather34.com

if the update performs as expected
it will show
"Weather34 Stand Alone 4.34"
Stand Alone Version 4.34 https://weather34.com

info is viewed by clicking the bottom right copyright logo

Hi Brian,

I tested this and it works fine. However, I am on the same host as you, so Ron will be the best test.

My new Standalone url https://myrtleweather.com/console/index.php

Chuck

[rzelle-K1TTC]

Brian & Chuck,

Tried the new .zip and it did not update the info.html so I unzipped the file separately and checked the new info.html in it and it showed the new Stand Alone just to make sure I had the new info.html
My server is a Synology running their latest version Linux and DSM with their their Web Station app PhP 7.3

??

..Ron

[prestwickwx]

I wonder if it has to do with this?

https://www.synology.com/en-global/know ... auto_unzip

Chuck

[rzelle-K1TTC]

Hi Chuck,
I think that would apply if I was actually using the DSM Desktop to Extract the files. In my case the the server's web/console2 directory is being accessed from my W10 PC via Firefox.

..Ron

[rzelle-K1TTC]

Brian & Chuck,

This is my first experience or attempts at actually using the Updates process using a downloaded .zip via the setup screen. All my previous updating was done via github app to my Local Repository then Winmerge to my Web Server's directory.

..Ron

[prestwickwx]

Ron,

I usually use Git as well. There must be something about the Synology web server config. Perhaps the file permissions. Maybe try 664 and 755?

Chuck