Weather34 TEMPLATE

[weatherist34]

ron, chuck have a try of this , addresses some intervals in charts temperature/dewpoint for non metric and removes the permanent Celsius symbol .

you can run it through the updater or extract and upload the files into the weather34charts folder.

https://www.mediafire.com/file/l149cyjk ... s.zip/file

its late here so I have look if it worked for you tomorrow..

ps you can still use GITHUB for updates if you prefer https://github.com/weather34/Weather34-MB-SMART-Console

Brian

[xray77]

Hello, Brian,
I found a small bug in the console version of the Nano-SD template: In the graphic display, the values are shown in kmh despite the display in knots. Maybe this can be fixed?

Bildschirmfoto 2020-04-01 um 11.22.23.png (69.09 KiB) Viewed 5157 times

Thanks an have a good and healthy day,
Best regards
Mike

[weatherist34]

what is your default wind unit setup in the console setup version

2.png (46.06 KiB) Viewed 5153 times

1.png (32.3 KiB) Viewed 5153 times

[xray77]

Hello, Brian,
Oh, then I actually had the wrong unit standing there: km/h, changed to knots and look there, it's all right now!
Thank you and excuse me, the error was as so often the user and not the programmer ...
Best regards
Michael

[weatherist34]

hi is not your error perhaps i should have originally connected the script to whatever unit is selected in the bottom panel. that ive just done and will update later this evening .

on a more humorous or stay at home note my wife purchased a home grooming man kit last week has i cant do my regular every 4 week trip to the hairdresser.. my wife now has a another talent to her resume ... i feel 10 years younger ...brian adapting to stay at home ...

[prestwickwx]

ron, chuck have a try of this , addresses some intervals in charts temperature/dewpoint for non metric and removes the permanent Celsius symbol .

you can run it through the updater or extract and upload the files into the weather34charts folder.

https://www.mediafire.com/file/l149cyjk ... s.zip/file

its late here so I have look if it worked for you tomorrow..

ps you can still use GITHUB for updates if you prefer https://github.com/weather34/Weather34-MB-SMART-Console

Brian

Hi Brian,

Ran the updater and it showed a success message, but it didn't update the files. So, I just updated manually. It worked fine on the previous update. Maybe there is an issue with the files being in a sub-directory.

Fortunately, I was already prepared. Hey I gave up on the "Barber Shop" several years ago. Bought a kit on Amazon and my wife has been taking care of that chore.

Another minor issue I spotted in the Forecast modules.

Capture.PNG (62.5 KiB) Viewed 5142 times

Chuck

[rzelle-K1TTC]

Hi Chuck & Brian,

My partner has been after me for years to let her cut my hair I guess now I'm a captive customer ...

I updated the charts update manually but have since reconnected the github app to the Standalone Console's repository. I thought after I did the manual update I should try using my iPad with Safari to run the settings update process to see if the issue is related to W10 & its Browsers. Now I see Chuck you've experienced the same issue.

??

..Ron

[prestwickwx]

ron, chuck have a try of this , addresses some intervals in charts temperature/dewpoint for non metric and removes the permanent Celsius symbol .

you can run it through the updater or extract and upload the files into the weather34charts folder.

https://www.mediafire.com/file/l149cyjk ... s.zip/file

its late here so I have look if it worked for you tomorrow..

ps you can still use GITHUB for updates if you prefer https://github.com/weather34/Weather34-MB-SMART-Console

Brian

Hi Brian,

Ran the updater and it showed a success message, but it didn't update the files. So, I just updated manually. It worked fine on the previous update. Maybe there is an issue with the files being in a sub-directory.

Fortunately, I was already prepared. Hey I gave up on the "Barber Shop" several years ago. Bought a kit on Amazon and my wife has been taking care of that chore.

Another minor issue I spotted in the Forecast modules.
Capture.PNG

Chuck

Missing WU Name - Fixed!

Thanks,

Chuck

[rzelle-K1TTC]

Hi Chuck,

Am I missing something I didn't see a field for the WU Name?

..Ron

[prestwickwx]

Hi Chuck,

Am I missing something I didn't see a field for the WU Name?

..Ron

Hi Ron,

Brian posted an update on GitHub with the 2 WU files.

Take care,

Chuck

[rzelle-K1TTC]

Thanks Chuck,

I have them via github plus others. When you mentioned the WU Name I assumed you were referring to the field in the Larger Template's setup for the WU 8 digit ID.

Take care as well,
..Ron

[weatherist34]

Daniel due to the large range of Weather Station Hardware brands in use I have made the info page based on meteobridge type hardware , it is not feasible for me to create a SVG image for every type of weather station hardware and I don't want to use poor visual graphics ripped from manufactures sites . so this is the best I can do based on what you see on my site .

hope its better than nothing..Brian

infopage.png (167 KiB) Viewed 5094 times

[weatherist34]

Hello, Brian,
Oh, then I actually had the wrong unit standing there: km/h, changed to knots and look there, it's all right now!
Thank you and excuse me, the error was as so often the user and not the programmer ...
Best regards
Michael

sorry I just realized and re read your post this is I guess for NANOSD version .. sorry no further updates the way suggested is the best way for that version using the console layout. Having gone back to it I realized why I opted for that method it gets rather complex catering for all metrics - non metrics-its-ms-mph-kmh- and so on..sorry for the inconvenience..Brian

[meteosa]

Daniel due to the large range of Weather Station Hardware brands in use I have made the info page based on meteobridge type hardware , it is not feasible for me to create a SVG image for every type of weather station hardware and I don't want to use poor visual graphics ripped from manufactures sites . so this is the best I can do based on what you see on my site .

hope its better than nothing..Brian

infopage.png

Great Brian,
I really like it, I can't find the update files on your site.
Thanks
Daniel

[weatherist34]

unfortunately at the moment I can't access the download site (Mediafire may be our local ISP network is overloaded due to "stay at home" ) its very slow has been like that for last few days . I will try this evening to upload to see if it uploads .alternatively files are auto updated to GITHUB https://github.com/weather34/Weather34-MB-SMART-Console

don't ask for translations

Brian