I had two GW1000s (Froggit branded) connected to it. On with an outdoor unit (Station 0/primary station) and another with 8 indoor temperature sensors (station 1).
I don't run frequent upgrades on the GW1000s/Meteobridge.
I upgraded the GW1000s on the 5th of May from V1.6.8 to V1.7.2.
The same time I restarted Meteobridge and let it upgrade itself.
On the following days I noticed strange things happening:
Primary station lost connection to MB, except rain data.
At the same time another RPI was getting information from the GW1000 in question via FOSHKplugin.
- Original error
- meteobridge_.PNG (52.7 KiB) Viewed 1657 times
At the same time, FOSHKplugin was actively and successfully communicating with both GW1000s.
After posting my question at https://www.wxforum.net/index.php?topic=43923.0, I got some hints for further investigation.
It turned out, that MB is having a problem, if I have two GW1000s connected the same time via the "normal" GW1000 connection.
I was testing various combinations of Primary station and station 1: interchanging both as primary station, only one of them as primary or St1.
The same time I added an "Ecowitt uploader" for both stations from FOSHKplugin.
I had no errors when only one GW1000 was connected "directly", but always had a breakdown of on GW1000 if both connected. At the same time, the FOSHKplugin fed stations were running flawlessly.
Now I have disconnected Station 1 from MB, but would like to have it run without the FOSHKplugin.
Please investigate this issue and let me know, if you need further data for the investigation.
