Weather34 Aurora MKII Version 2022

[weatherist34]

good morning Gary

thank you and i wouldnt dream of asking out of the blue so i just requested in general again it’s something i cant buy direct via amazon uk i just get redirected to amazon turkey now known as turkiye and not available here. have em sent to your home address and send on via royal mail much cheaper and trackable and prompt.i do hope you chose the “big wing” for flights and 34.4m for the stems?

as for purple air i will compile it in the week and test it with your ID for scenarios once done i will forward a simple update file via email.i received your email this morning.

as for using purple air direct via meteobridge i cant help there for numerous reasons i dont have any meteobridge hardware anymore and my purple air is sitting in a box waiting to be installed in my neighbors back garden .
that said it should be easily done by simply assigning it to a air quality string as there are numerous air quality strings in the weather34 api already but as above its not something i can test or compile for without some guess work and i dont have the time to spend hours or days on it .

so keep an eye on your email this week your ID will be hard coded into the update so dont share it or you may end up exceeding the API quota ..
.many thanks for your help and kindness ..

brian

[garybridge]

good morning Gary

thank you and i wouldnt dream of asking out of the blue so i just requested in general again it’s something i cant buy direct via amazon uk i just get redirected to amazon turkey now known as turkiye and not available here. have em sent to your home address and send on via royal mail much cheaper and trackable and prompt.i do hope you chose the “big wing” for flights and 34.4m for the stems?

as for purple air i will compile it in the week and test it with your ID for scenarios once done i will forward a simple update file via email.i received your email this morning.

as for using purple air direct via meteobridge i cant help there for numerous reasons i dont have any meteobridge hardware anymore and my purple air is sitting in a box waiting to be installed in my neighbors back garden .
that said it should be easily done by simply assigning it to a air quality string as there are numerous air quality strings in the weather34 api already but as above its not something i can test or compile for without some guess work and i dont have the time to spend hours or days on it .

so keep an eye on your email this week your ID will be hard coded into the update so dont share it or you may end up exceeding the API quota ..
.many thanks for your help and kindness ..

brian

Brian,

In future if you want help getting something, provided it’s legal and doable then just ask.
Are you going for the PA API or a hybrid meteobridge and PA ?

The flights arrive today, I hope the other bits will arrive soon then I can get them out.
Please email me with the address again.

G

[weatherist34]

good morning Gary

legal what are you insinuating no its just small things related to darts and majority of things are readily available here just the odd specific items(s) are not .thanks for the offer.

i will compile it to use the API as per original way, as before I dont have any meteobridge hardware anymore so using direct method is beyond me to do reliably and i dont want to get into the guessing game of doing it. with the api i can simply call the data via the browser url or simulate a call via the stationcron method into my localized demo.

will email you address..

have a good day..brian

[weatherist34]

gary , chuck reference purple air api change as promised i would do it this week wasn’t difficult spent more time re educating myself on template.

your receive a small (100k) simple update file via email shortly, simply run through simple update screen new option in setup screen to add your personal API key . any problems just drop an email as Im not always on the forum i generally have my email on my watch,phone etc it reminds me ..

it doesn’t work any different from original scripts just a cleaner api script ..co2 is included if your curious..

obviously wait for the next stationcron to run to get your current data

brian

[jmontamat]

gary , chuck reference purple air api change as promised i would do it this week wasn’t difficult spent more time re educating myself on template.

your receive a small (100k) simple update file via email shortly, simply run through simple update screen new option in setup screen to add your personal API key . any problems just drop an email as Im not always on the forum i generally have my email on my watch,phone etc it reminds me ..

it doesn’t work any different from original scripts just a cleaner api script ..co2 is included if your curious..

obviously wait for the next stationcron to run to get your current data

brian

Good morning. can they be shared?
Thank you.

[pwilman]

Morning all,

The temperature, humidity and pressure averages on my weather34 dashboard have all turned to zero this morning as opposed to displaying what the actual averages are. The actual temperature, humidity and pressure readings are all ok, so I am not sure what has happened?

Has anyone had this problem before and know how to fix?

I am not sure of the averages are sent direct from meteobridge, or whether the template works out the averages? Nothing has changed in my setup at all.

My site is www.paulwilman.com to see what the issue is

Paul

[weatherist34]

Morning all,

The temperature, humidity and pressure averages on my weather34 dashboard have all turned to zero this morning as opposed to displaying what the actual averages are. The actual temperature, humidity and pressure readings are all ok, so I am not sure what has happened?

Has anyone had this problem before and know how to fix?

I am not sure of the averages are sent direct from meteobridge, or whether the template works out the averages? Nothing has changed in my setup at all.

My site is www.paulwilman.com to see what the issue is

Paul

good afternoon Paul

all data is sent from meteobridge template doesnt calculate just reads what is in the MBREALTIMEUPLOAD.txt

cant help much there unfortunately. reboot both meteobridge and console at a guess all i can think of

[weatherist34]

hi Josep next week sometime there is a couple of things to correct but cant do it at the moment wife requires my laptop for a few days at work.

[pwilman]

Morning all,

The temperature, humidity and pressure averages on my weather34 dashboard have all turned to zero this morning as opposed to displaying what the actual averages are. The actual temperature, humidity and pressure readings are all ok, so I am not sure what has happened?

Has anyone had this problem before and know how to fix?

I am not sure of the averages are sent direct from meteobridge, or whether the template works out the averages? Nothing has changed in my setup at all.

My site is www.paulwilman.com to see what the issue is

Paul

good afternoon Paul

all data is sent from meteobridge template doesnt calculate just reads what is in the MBREALTIMEUPLOAD.txt

cant help much there unfortunately. reboot both meteobridge and console at a guess all i can think of

Starting new thread as not related to weather34

[pwilman]

Morning all,

The temperature, humidity and pressure averages on my weather34 dashboard have all turned to zero this morning as opposed to displaying what the actual averages are. The actual temperature, humidity and pressure readings are all ok, so I am not sure what has happened?

Has anyone had this problem before and know how to fix?

I am not sure of the averages are sent direct from meteobridge, or whether the template works out the averages? Nothing has changed in my setup at all.

My site is www.paulwilman.com to see what the issue is

Paul

good afternoon Paul

all data is sent from meteobridge template doesnt calculate just reads what is in the MBREALTIMEUPLOAD.txt

cant help much there unfortunately. reboot both meteobridge and console at a guess all i can think of

For completeness, my issue was a malformed database, caused by a random reboot of my nano! Looks like that meant no new data was being written to the nano so it could not work out the average. I ticked the “rebuild database on reboot” option and after a while all data started flowing again nicely!

Paul

[NEW2ARK]

how can I get the latest simple update file for the Purple Air resolution?

[weatherist34]

good morning sincere apologies for not getting back to you sooner unfortunately my closest dear relative passed away last friday morning after a long illness and being here in turkey (now known as turkiye) a muslim country the funeral was the same day so things happen very quickly and spent the last few days gathering my thoughts of the loss.


due to an unfortunate conversation with a Joe M i dont wish to receive any more contributions of dart accessories i simply dont have the stomach to deal with the animosity it creates so to those that kindly sent me some accessories i will endeavor to support and fix any anomalies that may arise for you, you can simply contact me via email .so sorry but enough is enough i dont want to deal with it , it is just simply not worth the hassle so simple updates will be made available to those individuals .


sorry for any inconvenience caused.

brian

[NEW2ARK]

im fine with the donation but you werent clear on how to do it????

new2arkansas@yahoo.com

[lorenz1982]

I also want to make a donation to get updates. How can I do?

[weatherist34]

change of thought ..