Data not reaching Wx nets

[Laxet]

Meteobridge Pro. We had a power bump yesterday. Since then, no data is reaching the wx nets. Weather Underground & PWS weather both say they are receiving updates, but there is no data. Data is being received on my Vantage Vue & my Weatherlink console from the ISS. I have attached two screens showing errors.

[admin]

Can you please show "System - Info" tab?

[Laxet]

Attached is the System - Info tab
In case it matters, It is connected via cable to an Eero 6 port.

[admin]

Sorry, as internal storage is no longer shown as available the Internal USB hub chip has failed. It needs to be replaced.

I would repair for free, but sending from US to Germany and back will be the issue. Do you have some electronics guy around locally who can replace a SMB IC? Item to be replaced is a FE1.1s which is a $1 piece:
https://de.aliexpress.com/item/10050084 ... ry_from%3A

[Laxet]

It looks like I may be able to replace it myself. Is there a board layout drawing or photo available? BTW, the link you sent didn't work, but I was able to find them here with a quick search.

Worst case, I can finally upgrade to the Pro 2, which I've been trying to talk the wife into for some time.

Thank you for your help.

[admin]

Here is shown how to open and close it: https://www.youtube.com/watch?v=Wn0_tM_jjZI&t=6s

You have to unsolder the OLED (which you can also replace once being there) and then you have to desolder the FE1.1s and replace with new one. When you have a rework soldering station with a hot air tube it is not too complicated.


Link to FE1.1s:

fe.png (151.73 KiB) Viewed 1556 times

Link to OLED:

oled.png (469.05 KiB) Viewed 1556 times