Meteobridge 6.3 acting as a DHCP server

This section covers the Meteobridge PRO, PRO2, NANO SD, Raspberry Pi and VM platforms exclusively

Moderator: Mattk

Post Reply
jpouyaud2
Fresh Boarder
Fresh Boarder
Posts: 18
Joined: Thu Nov 18, 2021 2:06 am

Meteobridge 6.3 acting as a DHCP server

Post by jpouyaud2 »

Hello,

Just to share a strange behavior I've just got with the last meteobridge build 6.3 with an RPI setup

after having upgraded to the last 6.3 build 2 days ago, I've discovered that the meteobridge's RPI was acting as a DHCP server giving it's own IP@ as a DNS server and Default gateway

the fact my local network was really impacted (no DHCP guard protection here), I've quickly rollback to meteobridge 6.2 and did not took any time to troubleshoot anything.

this is why I'm not fully confident with what I'm arguing here

this is just FYI Boris

what I can say is 2 x laptop was impacted after some hours after this upgrade

Regards
User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 7892
Joined: Mon Oct 01, 2007 10:51 pm

Re: Meteobridge 6.3 acting as a DHCP server

Post by admin »

I am rather sure that it does not act as a DHCP server when connected ONLY via WLAN or ONLY via LAN with your network, if you do both in parallel (which is not intended) you might have problems.

When you share your Meteobridge network settings I can have a look.
Post Reply