meteohub.de

Sorry for not following up earlier.

Today I did discover that WU and CWOP all the sudden showed the same pressure values. Not sure what has changed but after adjusting the offset a little bit, I am finally reporting accurate values to both services.

Just to answer the question: I am using a ...

So, I have just looked at the different systems and the reported pressures

1. Closest Airport (about 15 km away): 1028 hpa
2. My station on Wunderground: 999.21 hpa
3. neighbor stations on Wunderground: 1027 hpa (average)
4. Data reported to CWOP: 1045 hpa.
5. Meteobridge pressure: 1032 hpa
6 ...

Thanks - that is what I expected.

Which would mean, that the values should be correct. Unfortunately they are not. they seem to be reversed.

Is there a way to log the raw data being sent to the services for me to compare?

Thanks!

I did a bit more testing and it seems to me that:
1. CWOP is expecting the "Indoor pressure" level
2. Wunderground is expecting the "Indoor seapressure" level.

This way, it seems I get close to the expected values.

I am using Meteobridge, latest firmware (Meteobridge 3.1 (Dec 22 2016, build 10776), FW 1.4). I am reporting to CWOP and Weather Underground.

For whatever reason, the pressure values do not line up between what I see in the bridge and what is reported.

What I should be seeing: 1012 hPa [comparison ...

Perfect - thank you.

Yes, it is a pool thermometer, temperature only. t5temp works now.

Thanks for your help!

I have one problem with push notifications:

My system has two temperature sensors, on the live data page they show up as "Outdoor temp" and "Outdoor T temp #5". Both are showing values on the "Live data" page.

So far so good.

Now I am trying to set up a push notification:
[th0temp-act.1:--]°C ...

ok - I tested the 1036 and no luck at all.

It works fine connected to a PC but the meteobridge does not get any live data, even though on the "select station: page I do get a green check mark.USB mode on the 1036 display is set to 3.

Anyone else had luck with this model? I would really prefer the ...

Thanks for the quick fix - this seems to work now

Has anyone tried the Acurite 1036 display with meteobridge? It does seem to use the same PC Connect Software than 1025/1035/1525.

I have a problem with the FTP Camera Upload...

here is the setup:

Aircam 1.2 using "External Picture" to get image (Problem with initializing Aircam).
Upload to Wunderground every 5 minutes
Camera FTP Upload server every 2 minutes

When looking through the images on the FTP server, I did notice ...

which firmware version would this be? I am on Linux 3.3.8 mips (BE), FW 1.4, MeteoBridge 2.3 (4298) and have the same issue.

It does work fine when I use the cam with "External Picture" by entering http://192.168.Ix.x/snapshot.cgi?chan=1

Aircam is Version 1.2, HTTP is set and "allow Screenshot ...