meteohub.de

Brian,
As others have mentioned, glad you're OK!!


Phil A.

Hello,
Have an Amcrest/IP cam that has worked well for the past year. Recently I added a template that has web cam capabilities. The camera output shows everything in orded, but the pic upload to the templates has stopped. Now when I check the camera URL (https://admin.meteobridge.com/cam ...

Admin,
NO wifi.....I believe the culprit was a bad ethernet cable that had a broken lock tab. Hopefully things will return to normal.

thanks for the reply.

I've been experiencing RPi4 connection issues for a few months now. Several times a month the connection drops requiring either a reboot which is not a big deal or a power cycle which can be a pain. Would updating the RPi4 help?? Are there any other options I can try to stabilize the environment ...

Hi Gyvate,
drops= the mb stops updating ..multiple timeout and other errors under "live data" . The mb control panel freezes and upon browser refresh presents a "page not found/timeout, however my router shows that it's assigned to a static ethernet connection. MB has been up for months at a times ...

I have been running MB on an RPi4 for over a year with good success. Over the past two months MB drops however my router shows the ip as active.
The work around is to shut down and reboot the Rpi which is a hassle.i.e connecting the mouse, KB, monitor. Once it's up again I disconnect the peripherals ...

Good news!! Problem Solved! Please Close....

I needed to insert the URL generated under the Weather Network tab (with/without text overlay) into the Weather34 control panel "Webcam Add Your Path/Url to your webcam (i.e https://something.com/webcam.jpg)
https://admin.meteobridge.com/cam ...

Making progress...power cycled the MB RPi. Now I can grab images from the Cam settings along with Weather Nets MB Weather Cam settings. Images were generated with and without text overlay. Next on to the Weather34 Aurora MKII!!

stay tuned.

phil

Boris,
I'll continue to research the problem. Most likely a setting/limitation of the camera. I have no issue with Meteobridge. It's a good product that I have been using for years.

thanks for the reply...

Thanks Boris for the reply.

Tried "http://admin:admin@192.168.x.x/cgi-bin/snapshot.cgi?1" in a browser and editing the MB Cam External Picture URL: - received "Error: Camera URL not providing data"

Using: http://admin:PW@192.168.x.xxx/cgi-bin/snapshot.cgi?1 ,

I do get an image when I toggle the ...

Hi All,
Before I get into my problem, ANY help is greatly appreciated!!! I'm not super techy, so please understand.

My MB platform is a Raspberry Pi 4 Model B
RAM: 940 MB total, 800 MB free (14% used)
Storage: WD SLC, 14.6 GB total, 14.5 GB free (1% used, 3380.8 yrs)
SW Version: Meteobridge 5.3 ...

HDMI switch was crossed up.....

solved

I received my MB approved sd card today and followed the instructions for set up on a RPi 4b. I downloaded the .bin files and copied them to the sd card via RPI Imager. Installed the sd card and started the RPi. It stops at "root@meteobridge:/#"

I tested the RPi on a NON approved sd card a couple ...

solved