meteohub.de

Hi

I read from Weatherist34’s post that Brian produced a template to export data from MeteoBridge in year format which will drop right into Weather34.

I would be very pleased to download this if someone would be kind enough to provide a link.

Thanks


Chris

@JPB My sentiments entirely. I live in a rural location where power and telephone are often fed overground. Last night, for example, there was a two hour power outage. My Mb Pro lost sight of the local access point even though both MB Pro and local access point are powered through a UPS. Consequentl...

I did.

I also tried several other months but to no avail.

It seems the MB Pro is stuck in October and the following message is displayed each time I click save and apply:

Having read this discussion, I note there is a difference of 2 hours in the history data and the graphical data. My timezone is set to Europe/Athens (UTC+2) For yesterday the MBPro shows 7mm precipitation at 15:00 (UTC+2) in the history, which was the time of the actual event. The 24 hour graph show...

My MB Pro is set for the rain year to run from October.

The year total shows only rainfall from 1 January and not 1 October as I would expect.

How do I access the total from October 1?

In fact, each time I try to change the Annual Rain to start form another month, it reverts to October.

This is a feature I would be particularly interested in.

I would hope the MB Pro could be able to resend any missing data if it is unable to communicate with a remote service for any reason.

Latest system log: oled (29.12.2016 01:20:16): process started. database (29.12.2016 18:15:26): process started. wnetd (29.12.2016 18:15:28): process started. system (29.12.2016 18:15:28): start of logging process initiated. logger (29.12.2016 18:15:29): databases connected. Update interval 3600 sec...

My MB Pro stopped sending data to WU at 00:41 29 December I received an alert from WU at 02:50 I logged on to the MB Pro shortly after. Looking at the history page, I could see that data was being recorded The Live Data page showed as follows: Meteoplug last success 29/12 00:32 Meteoplug live last s...

@ADMIN

I installed ATP NanoDura USB storage as recommended by you

You are not alone I have had a lot of problems with my MB Pro. Here are a few: Internal USB flash failed within a couple of months - replaced at my own expense MB Pro failed to back up to external USB stick - fixed by admin MB Pro fails to boot when external backup USB device inserted MB Pro reboots...

For the past two days there has been a problem with the Internet outside of the property, on the public network During this time the MB Pro displayed 'No Network Found' but has been operational - lights flashing, screen dimming to schedule etc The phone company has fixed the problem, so the Internet...

MBPro fails to boot from Cold when USB memory stick inserted in front USB socket

Making regular backups leaving the USB stick inserted in the front USB socket causes the MBPro to fail to boot after power cycle. No lights are displayed after initialisation

I have MB Pro together with Vantage Pro2 Wireless sensors. Rain, Temp, Solar and UV are on one ISS whilst Wind is on another, located on a nearby roof. Rain, Temp and Solar register signal strength as -48db, UV shows signal strength at -96db and frequently drops out. They all share the same ISS. Can...

My MB Pro is still utterly unreliable. I have just had to restart it for the second time this week. I have been away for five days but was fortunately able to successfully restart it using the Web interface when I discovered it was no longer sending data reliably. I have put it in a location where I...

When installing the ATP USB, I formatted and then imported my previous database. It appeared to work for a while before coming up with a lot of errors, then finally failing completely. I have now reformatted the ATP USB and started afresh with a new database. After a couple of cold reboots, I appear...