meteohub.de

Just get my first Raspberry start playing with it, to setup Meteohub I would like to buy a new microSD Card, as the current used is one start to get problems in my mobile, so nothing should be used to setup a new 24/7 running system.

Any experience what cards should be used or even shouldn't be ...

Today I tried to downgrade to 5.0h to follow the procedure to press save once as described in the aouncement.
But that didn't help get same error with 5.0h.

checked if I can reproduce this with the VMware version but as the liense on the old is expired I can't insert e-mail data before upgrade to 5 ...

Hi,
was you able to solve this?

Seems I run in the same problem when I updated my system from 4.9w?? to 5.0i

regards
El

Hallo,
konntest Du dein Problem lösen???

Habe die Tage nach und nach von 4.9w? auf 5.0i gewechstelt und genau das selbe problem.

Gruß
El

Hi,
currently planning a second Weatherstation at the Location of our Amateurradio Club home.
Weather Hardware would be a WS2300 compatible Weatherstation already exist.

Requirements vor hole system:
- upload to Website (Leuven Template based)
- upload to APRS via Internet, APRS via Amateurradio ...

Hi,
I plan to migrate from iConnect to Raspberry with in this year, as there is a Camera for the Raspberry available I think about using this as Web/Weathercam. Have somebody experience with this module in a meteohub environment? Might the usage of the meteohub webcam function possible?

El-Rain

Just short update,

Error stopped after some hours and didn't comeback till I stopped logging today, when I enabled logging again got error to read enovy internal logger (see other thread) and got back the error.


Bad th0(0) sensor data, "humidity" (110) out of range [0:100]


lets see if this ...

Hi,
to clean up some old data of my old external sensor th0 which transmit wrong temp value I see a problem when reenable logging again.

- the "sensor data, "humidity" (110) out of range [0:100]" error comes back while it was no shown for some days, at least not since I cleared the meteohub log ...

Records with bad hum data are not stored, but reported in the log file only.

How is it with the data on Port 5500 are they transparent or are Loop packets with values out of range dropped here as well.
As I take a short look here while I had the alerts and the value for the outside humidity ...

Since last 4.9u I have the following problems.

Davis VP2 with Envoy
during Night I get the error that humidity is out of range but when check the collected data and Sensors tab and the console all looking OK.

logger (11.06.2013 00:14:28): Bad th0(0) sensor data, "humidity" (110) out of range [0 ...

Hi,
maybe the problem is similar to the problem I had ( http://forum.meteohub.de/viewtopic.php?f=14&t=9122&p=12897&hilit=altimeter ).

Unfortunately Davis will only send the sea level pressure via serial via the LOOP packet and then Meteohub will calculate the local and altimeter pressure from there ...

Hi Dave,
Protocol of Davis is documented, you can find this on the Davis Webpage as stated before in this thread.
As well they have updated this, needed Firmware Version 1.9 on Console/Envoy, which add a new dataformat this include as well the raw pressure value. The 1.9 was published in 2010 but ...

Hi David,
I tried this, but with negative altitude it looks like both pressure and sealevel are recalculated as both are changed to the same value.
The other question is how this impact the Altimeter pressure as I will send this data as well to APRS.

actual_thb1_height_m 0
actual_thb1_press_hpa ...

Hi,
when searching around about this a bit in the web I reviewed the readme file of VPLive and there I found in a statement which might explain all this.


Calculates the raw station pressure and the altimeter pressure from the console's reported sea level reduced pressure


After that I searched ...

Hi David,
just back home.

I unplugged the old weatherstation physically from USB Port of the iConnect, deleted it from weather station menu and reload meteohub. But problem is still the same.

actual_thb1_height_m 75
actual_thb1_press_hpa 1015.4
actual_thb1_sealevel_hpa 1024.2

When I compare with ...