MB Pro Red hanging about once amonth

This section covers the Meteobridge PRO, PRO2, NANO SD, Raspberry Pi and VM platforms exclusively

Moderator: Mattk

User avatar
plex
Expert Boarder
Expert Boarder
Posts: 90
Joined: Tue Nov 30, 2010 1:01 pm
Location: Denmark

Re: MB Pro Red hanging about once amonth

Post by plex »

dwhitemv wrote: Fri Jun 26, 2026 3:40 pm Random thought, is something spiking memory use and the OOM killer is killing everything?

If the MB was connected via wired Ethernet then ping would likely still work, and that would be a useful diagnostic. (If ping were to fail then that would indicate that the unit is hitting a kernel oops or something like that which leans more toward hardware failure.)
Mine is wired to Ethernet, and it’s not possible to ping it after it crashes.
User avatar
plex
Expert Boarder
Expert Boarder
Posts: 90
Joined: Tue Nov 30, 2010 1:01 pm
Location: Denmark

Re: MB Pro Red hanging about once amonth

Post by plex »

WS Heinenoord wrote: Fri Jun 26, 2026 7:22 am I'm glad to see my MB is not a sole case, but regret you have similar issues. It's very annoying because data isn't captured and uploads fail. Boris had a look, logged on to my MB and the only unusual he noted was that the MB CPU-% spikes every full hour to 200+ values. To see that for your MB, go to the "generate graph-tab" and select "MBPRO-health" graph. The cause is unclear. Switching of all events, all uploads and even disabling internet access did not change the pattern.
My MBP red cap CPU (grey) spikes to 153% every hour as well
Attachments
MBP-health.png
MBP-health.png (125.05 KiB) Viewed 14 times
yamahabest
Fresh Boarder
Fresh Boarder
Posts: 10
Joined: Thu Oct 16, 2025 1:11 pm

Re: MB Pro Red hanging about once amonth

Post by yamahabest »

WS Heinenoord wrote: Fri Jun 26, 2026 7:22 am I'm glad to see my MB is not a sole case, but regret you have similar issues. It's very annoying because data isn't captured and uploads fail. Boris had a look, logged on to my MB and the only unusual he noted was that the MB CPU-% spikes every full hour to 200+ values. To see that for your MB, go to the "generate graph-tab" and select "MBPRO-health" graph. The cause is unclear. Switching of all events, all uploads and even disabling internet access did not change the pattern.
I see spikes every full hour close to or over 100%. The one indicated by 14(:00) was 137%.
At 17:00 (not in the screenshot) there was a spike of 154%.
Screenshot 2026-06-26 170353.png
Screenshot 2026-06-26 170353.png (40.13 KiB) Viewed 12 times
yamahabest
Fresh Boarder
Fresh Boarder
Posts: 10
Joined: Thu Oct 16, 2025 1:11 pm

Re: MB Pro Red hanging about once amonth

Post by yamahabest »

This seems also strange. I have a gap where nothing is shown on the graphs.

It is between June 25th, 13:04 and June 26th, 08:51.
Screenshot 2026-06-26 171801.png
Screenshot 2026-06-26 171801.png (43.37 KiB) Viewed 7 times
Screenshot 2026-06-26 171943.png
Screenshot 2026-06-26 171943.png (49.23 KiB) Viewed 7 times
But while this occurred, WOW was fed data without issues:
Screenshot 2026-06-26 172705.png
Screenshot 2026-06-26 172705.png (34.96 KiB) Viewed 7 times
What can also be seen is that somehow the RF already stopped at around 11:04 (on the 25th), and resumed at around 13:05.
Post Reply